Forum Replies Created
-
oracal do a prinatble banner vinyl which i use, but i havn’t done that big in panels b4
-
Paul Goodwin
MemberSeptember 15, 2005 at 5:57 pm in reply to: clipart picture needed.. can you help?Hi Shane i have one that is close but isn’t exact.
-
Thanks Robert
I do need to write with it 🙁
-
Paul Goodwin
MemberSeptember 10, 2005 at 8:07 am in reply to: Fleet Vehicle Graphics: Hanna & HowieWell done guys
bet you was charged up to do all of them in a day? and wher eis the pic of the banner orwasn’t that important
😀 -
I got a variable heat one as well, it’s great.
i think it’s a <cough> Black & Decker <cough> but it works 🙂
-
Thats what i thought when i saw it, those things going at speed down the motorway, if wind gets in behind ( well not if when 🙂 ) how do they not get blown out?
-
Niki
I have seen them down here too, looks like a metal clip frame ( like a poster frame) i suppose if the frame clicks tight enough it holds it in?
next time i see one i’ll try and get a picy
-
Paul Goodwin
MemberSeptember 5, 2005 at 7:48 am in reply to: can i get a supplier to slit my vinyl in glasgow area?The lOndon branch of Ep send them out to be cut and then charge you acordingly 🙁
-
Nice Pat
i like the salon. was that a painted wood fascia you fitted to?
-
Nice work Brian.
what machine did you use for the prints?
-
Hi Ed
copy the line for as many colours you have ( so for that logo 3 lines and 3colours) and change the colours to suit, and stack them on top of each other ( in Signlab u can tell the copy wher eto go ie: in the same place).
when u cut your colours now you will have the lines as well in teh right colours, then when u lay up all you have to do is align them on top of each other and it’s sorted.
What i do sometimes is make the lines into a L shape in 2 oposing corners so you can line up a bit easier.
Hope you understand my ramblings.
-
Yep sorry guys 10×5 is white only
-
$3 ? thats what £1.75? a gallon
we are nearly £5 a gallon do the math ……………………
:banghead:
-
I’m sure europoint do a 10×5 sheet?
Thanks Nicki i’ll check in morning
-
On a different note , where can i get a cream/magnolia coloured foam board from? it’s only got to last 4 months and i need 4 10×4 sheets. or is there a paint i can use instead of flooding it as i don’t realy want a join.
-
-
Vectorwise def ,
Andrew does a cracking job at a very reasonable rate.
-
Congrats may you have many many happy years together.
-
That realy is nice.
wouldn’t last long over here some scroat would rip it off and melt it down :lol1:
-
Paint splat spot on thanks Kev
-
Paul Goodwin
MemberAugust 21, 2005 at 10:26 pm in reply to: The ball has began to roll… who’s next?You have PM Rob 🙂
But you aint getting my pint 😉
-
Nice bright and cheerfull 🙂
-
I’m on yell and tbh get very few enquiries through it.
-
-
I have one to do soon. i’ll grab the guy tomorrow and see if he has them for u.
I have a skyline to do. it’s on the freighter coming over from Japan atm.
-
I have it at work if u still need it i’ll post in morning .
it’s the one from the rugby shirt
-
Well surely if they order on line, they must have their postal details and name etc?
just print that off and keep it in your folder thats what i do.
also on your site have a disclaimer that is on teh ordering page, so when they order it says something along the lines of ” i have read and understand the T&C”
-
Happy B’day m8y. don’t have too many Breazers (drink1) 😮
-
quote :as i understand it and as the man who paid me a visit from dvla said that you have to keep details even if you call it a show plate its a number plate end of story.
When i make “Show plates” i keep all the details as well and get the customer to sign it either in person or electronicaly by e-mail. As i have also been told the same as Chris has.
Gives some back up. i had a visit from plod a while ago and there was nothing they could do as i coudl proove i sold the plates as show plates not road legal ones.
-
I just snap mine off and into the bin. Then that goes into the main bin outside which is picked up by a the bin collecting machine.
or to quote McRod
“Place hand on wheelie bin lid, lift in a vertically upward direction, Snap off blade into aperture created by the vertical lift on the lid. ”
😛
-
quote :Not sure if “wrap” means anything to Bob The Builder yet.
I had the same the other day while designing my leaflets, i used the term Vehicle Livery Specialist and the amount of people that i asked their views on didn’t kow what that meant.
Very nice Wrap btw how long did it take and how many of you etc?
-
That looks realy smart Shane.
Did you take all the trim off when you fitted it ?
-
I would like to know this as well. My web teckie guy can do it but it isn’t going to be cheap.
-
Paul Goodwin
MemberAugust 4, 2005 at 7:19 am in reply to: Beaten by a ridiculous price! What do you think?quote :most people would be happy to earn £10 an hourYes but what they forget is £10 an hr doesn’t pay their bills
-
Did you leave your heads in soak while you was away? if not sounds like they have dried up.
-
Thnaks Adrian , i did try there but i used smiley instead od smile
top stuff thanks
-
You can d/l a 30 free trial from here
-
Whats the real thing Jill ?? i’m married 🙄
-
Like it 🙂
I get a laugh every day as my wifes initials are B.J :lol1:
-
Klingon: “tajwIj ‘oHbe’ chorlIj jeqbogh Dochvetlhe’e!”
Translated: That is not my dagger protruding from your midsection! …:lol1:
-
Hi Lee
i have just got a trial version of Clarity, trying it atm. It seems to take the guess work out to some degree.
then it comes down to the persieved (spelling?) value of the job etc. -
Ok have i missed something here?
something to do with the last Star Trek on sky 1?
-
Makes 3 of us 🙂
but it must be good
-
Have a look here i havn’t had a chance yet , but it’s a good site
-
I ge tmine in ready made from Cherwells, not a bad price, and again it frees up my time.
-
I got it 🙂
and i can see my house, garden and drive etc. it is a realy cool program.
but just think of what the military can see if all we see is a blured version for privacy sake.
-
quote :Anyway, back to the point .. we lease, we pay monthly, we like it that way.
do you know how to get into this van carrie?
And you play a better game of BF2 than Frijj :lol1:
Sorry just back from the pub and couldn’t resist
-
how long do u keep it at those temps Rob? just bring it up then take heat away or hold it for a min or 2 then let the heat off?
it’s also a great tool to use to make sure your not about to take a mouthful of cold coffee :lol1:
-
I use one when doing recesses now , heat to over 80 a couple of times.
Borrow mine from my m8 in the workshop i share , he got it from snap-on
-
Hi Shane i did try my local branch and they didn’t have any.
I’ll try them again in teh morning
-
Hi all
thanks for all the replys and info 🙂
need to realy sit down now and go through it all.
i have had some advise of of someone and they say the Cadet isn’t realy suitable for doing this,
The question is can i get a good result or not on the cadet with teh materials mentioned.
As i have said i realy need to sit down and read all this now. as the answer is probably there.
-
Paul Goodwin
MemberJuly 12, 2005 at 6:16 pm in reply to: Quick pricing question (so settle a debate)You got a website for that Ian?
-
I get mine from Brian @ Impact, very good i find. I think the number is on the main page
-
One is opening the other side of town from me as well…………..
-
Thanks Guys 🙂
How about a bit of bothe the pics and menu printed but the prices in cut vinyl?
-
Paul Goodwin
MemberJuly 1, 2005 at 4:48 pm in reply to: why is vinyl pulling out of panels on sprinters?I used a thermomitor today, heated it up till over 80 twice 🙂
shall see if that makes a differance…..
-
I use a large sharp knife / scapel thingy from Snapon. it fits my chubby paws quite nicely
-
Err not realy as it wasn’t me that did it it was Phill my mate on his machine. i’ll have a chat tommorow with him and se eif he can write it in a word doc which i’ll send you.
-
I have a friend who had this problem and i believe the ink in teh tubes got contaminated. Do u do regualr head sokes? as this is what his problem was , the black got sucked back intot he other tubes. he had to syringe the contaminated ink out, and everything was hunky dory.
-
Paul Goodwin
MemberJune 28, 2005 at 7:53 pm in reply to: why does application tape tear near the end of a roll?John your not tearing yourself away from it are you?
i’ll get my coat and shut the door on the way out ………………………..
:lol1:
-
I knew that Shane honest 😳
i pay around the same as L.J
slit to anylength from a 1220 Roll
-
Hi Scozzie i get mine from KPMF
-
I find the corners curl very baddly as well.
I only use conform now much better………….
-
Use it for err umm………
-
HI Rob
Next to Madams house it’s Baker street m8. i spent many a night walking around their underground checking the tracks 🙂
And as to the Irn Bru McRod came down and when we went shoping to the little Spar shop, i did ask whats missing? THE 8 ROWS OF IRN BRU 😮
i love the stuff but down here it’s not always easy to get in the small shops and in tescos they only have a small supply of it 😥
oh we also dont exept your toytown brown money either as Rod found out to his disgust a coupel of years ago :lol1:
Anyway welcome back
-
Very nice Peter.
John i told you the 751 was a good vinyl , now it’s a cast it’s even better 🙂
i just dont like their aplication tape.
-
Nice one Shane
pls do try and get a pdf up it would be a great read
-
Paul Goodwin
MemberJune 20, 2005 at 4:50 pm in reply to: How hot is it in your office / workplace???it’s 17:49 in aylesbury atm and in my office it’s 86f / 30c
-
Paul Goodwin
MemberJune 19, 2005 at 7:53 pm in reply to: can anyone help with cadet questions i have please?i’m running a amd 2800 with 1gig ram
-
Paul Goodwin
MemberJune 18, 2005 at 4:19 pm in reply to: can anyone help with cadet questions i have please?I didn’t go down that route i bought the machine from printmax via a lease deal with another company.
but i did get a good deal from printmax via the boards. -
Paul Goodwin
MemberJune 18, 2005 at 4:12 pm in reply to: can anyone help with cadet questions i have please?As Rodney says ….
but dont forget to line up your reg marks along the cutting strip or the machine wont find them.
-
That does look very nice 🙂
-
Sorry to hear that as well bstards deserve to be shot.
I have sensor alarms throughout the building + door and window sensors ( linked to the police via phone and radio) also steel rods that come out of the floor in front of the workshop enterance to stop ramraiding the main door or driving anythiong out if they do get in.
-
Becky where do u get the blanks for the 3 part system please, this sounds interesting…………
-
i got that e-mail
i have never owned a earlier version sounds dodgy marketing to me
-
Cheers for that Phil, didn’t know about the 60deg bit or red on the sides 🙂
BigG thanks for tip about puting on cast first i’ll do that
Scozzie willdo 🙂
-
Was going to use the NikkALITE mg 4400 SERIES FROM EUROPOINT
whoops caps
-
Thanks BigG 🙂 it sure does
i knwo wet is a dirty word 🙂 but shoudl i slide the squares in wet or should i do dry?
most of my fitting is dry now anyway, but if this stuff sticks like sh*t to a rocking horse would wet be better for a n00b liek me?
-
Nick
this maybee a stoopid question, but after teh frogjuice has gone off can the prints be run though the cutter to cut??
ie: print now cut later option
slap me if i am being stoopid
-
I was told they should last 3 yrs Becky
I have seen and done rear plates that havn’t lasted 3 months before the reflective starts to peel off 👿
-
Could i please ask Scotland to now give us back our sun, as it’s bloody cold down here today 🙁
i may have to take my shorts off and put my t-shirt back on 😀
and what are those fluffy things in teh sky?
-
One day of sun in the last 50 years and you want AC :lol1:
don’t worry Rod from today it will be back to your normal rain that you love.
But if you want a good cheap unit just open your windows :you:
Currys do one a stand alone that you put a pipe out the window, about 200 quid. I can talk to my bro ( he’s a manager so maybee some discount ) and see if he will have it delivered for u.
or buy one online and get delivery free 🙂
-
Thanks for all your help guys.
John i’ll call him later today to see what he can do 🙂
-
Enjoyed that shane 🙂
-
Thanks Dex and Lynn
plenty to choose from now 🙂
-
That realy does look nice.
-
Cheers Simon
not what i could use at a vets practise, but i will keep it logged for halloween,
or even to make a pointy thing out of on a stick and poke the kids with 😀
-
That does look very effective Shane
beat her with a stick until she agrees with us :lol1:
-
here u go
-
Paul Goodwin
MemberJune 6, 2005 at 11:41 am in reply to: How much do you hate the frog? Shoot it here90 so far for me
-
Bl*ody h*ll ………..
Hope you catch up soon Vinny and the insurance company don’t try to put off sorting you out 👿
-
Sorry john had a good look no luck here.
i’ll have another look on my other machine which has even more in a little while
-
Looks nice
who’s taking it off 🙂