Paul Goodwin
Forum Replies Created
-
Cheryl
is it saying time for Maintenance? or is it literally stuck in a cleaning cycle?
If it’s saying time for maintenance , you can bypass this by pressing Enter.
but i would do a cleaning cycle on it. hold down the cleaning button while turning it on and that will go throughteh process for you.
if it’s stuck i’m not sure what to do? poss turn it off at the plug for 30 secs and reboot it…….
-
Brian i use a kitchen worktop (good quality one i got hold of0 and a cutting matt. so far it has lasted just over 2 years. and it will be going to my new workshop with me.
-
Cheaper isn’t always better quality……
-
I have this problem every now and then, what i do is clear space on my HD, then re-rip it, then it normally works ok.
I think it is def a memory prob where the machine doesn’t have enough memory to rip properly.
-
Nice one Dave
but it will happen again in 3006 🙂 but none of us will be here to witness it 🙁
-
Wow what a great design, realy affective.
-
Very Nice job.
Did the customer supply the graphics ?
-
Great work 🙂
what did you paint it on if i may ask is it a bike tank?
-
Could have picked up a air block Nik when it ran out but was still trying to pump ink a little bit?
-
I thought 32 pass was better than 16 ? is it the other way around then?
-
Great News :thumbup2:
-
Hi Nathan
on the cable systems i double it then add hourly fitting charge. -
I’ll make Weds and Mrs Mort wants to come as well 🙁
-
Happy New year 🙂
-
Cheers for that Rob
-
On th esubject of profiles. has anyone been able to get hold of one for the cadet for oracal vinyls? as oracal only do the versacamm rip. I’m using troop 5 (wasatch) with teh standard md5 rip atm. but Robs interested me now with his “tweeked” version 🙂
-
Happy Christmas everyone
Nicki i got your message but i can’t pm for some reason? sent a message to Rob so hopefully he will forgo his turkey and breazers just to sort me out 😀 😀 😀 😀 😀 😀
-
I’ll 5th it
Happy christmas everyone and thansk for all the help and support in the past and hopefully in the future
-
😮
-
Paul how about static cling vinyl on top?
-
It happens regulary i’m afarid.
stops you poaching customers, sabotaging the workplace etc.
happened to my wife, she was given 5 mins to leave the building.
-
Mozi ok 4 me 2
-
Great stuff
hope you have many many happy years 😀
-
Greta stuff Phill, very interesting
-
If you want a female Dragon i’ll send you a picture of my Mother-in-Law foc 🙂
sorry couldn’t resist
-
😮 😀
-
Thanks George looking now
🙂
-
Careful Jill, he was up til 4:14 this morning doing that I’d suspect, he could agree to anything……
Specialy as Robs been polishing his balls 😳
btw Christmas Bah Humbug from me too 🙂
-
I looked on BOTW for you and no luck there sorry.
-
lol
-
Thanks for the reply Warrick
Good points there but
quote :Where as if you only have an 800mm machine you are limited to this size.What if we only have the funds or room for a 800mm machine?
-
Hi Warrick
quick question for you. as there are a large number of 760mm wide machines over here will you be making a model to acomodate them?
-
I too looke dat the Ezy Taper and it isn’t the price thta puts me off as such it’s the size of the machine. I have a 760mm cadet so a 610 is too small and the next size up is way too big.
So i’m still on the lookout…
-
:lol1:
-
Very sorry and shocked to hear that Nobby. I hope they all come home soon. and my heart goes out to you and your family …
-
Thanks for that
Brill 😀
just amended now that i have found it
if you liked “JCB” you may like this one too
brill song and great flash animation
http://www.lowmorale.co.uk/creep/ -
Well done Shane
-
😀
-
Hi Jay.
If your buying impacts cd on friday, i’m sure if you contact brian he will help you out.
-
🙁
But congratulations for making the finals
-
Good luck Jim 😉
Andrew you don’t need a DVD to do that to Rob 😀
-
Think i have it at the work shop, i’ll have a look in teh morning for you James
-
It was put on my machine by an engineer when it was repaired.
-
When i had my machine fixed last week i had the new firmware update that runs a clean cycle every 12 hrs i think it is, i was told just to leave on standby and it looks after itself.
Anyway i’m only shut xmas day and boxing day so just like a normal weekend for me.
-
quote :Try Carrie Babbling then in Google
I tried that John on teh UK only search
7th in the list 🙂
quote :what do we think of having a glossary of commonly used terms on the siteGood idea
-
They also have on there the program used to do the effects and the raw files, so if you read the how to, you can also set it up on your pc.
When i have time i’m going to try that.
Musical LED signage, i’m sure someone can do it 🙂 -
Thansk for that Shane, the other clip isn’t bad either 🙂
-
:lol1:
-
Some great ones there 🙂
-
:lol1:
Attachments:
-
No sorry don’t have anything 🙁
-
Hiya
Corbel 🙂 not from the nappa valley are u in CA? I have family out there and one of them is a manager for corbel ( the brandy makers )
nice logo btw 😀
-
Nacy that’s Shane 🙂
-
If i remeber rightly ( and i coudl be wrong 🙂 ) Shane uses Oracal vinyl.
he could put you in touch as well to a supplier possibly?
-
I Don’t know if it’s real or fake but it sure is a cool vid 🙂
what i have read though is the guy used his pc and some profesional lighting software to do it.
-
Looks good Shane, and nice to know that you didn’t go in cheap and still slamed the oposition.
Have you got a side on view?
-
It was Printmax , but as Rob says not sure if it’s ongoing.
-
Hi John
yep thst easy on straightforward shapes, but if it’s multiples or complex shapes there is nothing quite like print now cut later 🙂
-
yes John,
i use a water and baby shampoo mix. but and i stress this i don’t trust it to stay in panels. i only do it for flat panel work.
the 1 main problem i do find sometimes in if you get it to wet and the backing paper curls it can be a pain to then re-feed into my cadet and cut.
-
atm yes. but i dont do any recess work with it as i dont trust it to stay.
any recess work i get another company a few miles away to put it through their machine.
-
Hi Lorraine
I lam by hand for flat panel work as i can’t afford a laminator yet.
the main problem i have is sometimes the print goes milky in places, but it does dry out after a couple of days.
since i started using J&J baby shampoo it isn’t as bad.
-
Hi Adrian just had a look sorry i opnly have industrial 736 which is nothing liek the one your after
sorry
-
Nice find Dave 😀
-
Hi Kevin
welcome aboard
-
I got 10 right 🙂
( i was waiting for my print this morning so i had some spare time 😕 )
-
Very Nice 😀
-
:welcome: Ben
congrats Paul
-
sorry Andrew had a look but no luck here:(
-
I only have metaplus italic as well sorry.
i do have a font called matrix though but not ffdot matrix
-
I’ve had a good look richard. apart from the L i’d say Gill sans.
-
Great Pics Shane, thanks for sharing.
Did you make any new purchases while you were there?
-
Your bookmarks should be in your “my Documents folder” under the root c:/ drive. easier to talk u through finding it via voice than typing out instructions.
-
(drink1) HAPPY B’DAY
-
😛 in a sick kind of way 😮
-
Thanks all 🙂
-
Hi ANdrew i tried them first they no longer stock it 🙁
Shane i have tried all my stockists and all they do is vehicle grade .85 👿
thanks anyway guys
-
Well done.
I dont think you will look back ………………..
-
LOL
-
Thanks Peter & Carrie spot on 🙂
-
I cut my off cuts with a stanly knife and straight edge. just keep cutting through and once you have got through the core u can bend it to snap a nice edge on the other side. then use a file to clean up the bur.
just mind your pinkies 🙂
-
Cheryl your a (angel)
:wow: THANK YOU 🙂
-
sorry had a look but no joy 🙁
-
Thanks Marcella euro is one of the ones that McRod sugested.
Shane
i’m the same i’m sure i have seen it b4 if you could that would be great 🙂
-
Like that one :lol1:
-
Your a star 🙂
thank you
thansk as well Lynn & Dave
p.s see you on the server later 🙂
-
Thanks for looking Andy.
i’m in the middle of reformating atm so i’ll have a proper look once i’m up and running again
-
Congratulations to teh 4 of you (love1)
-
that is cracking sign 😎
but as joe said whythe bottom one so small?
-
Shane
save the time and hastle looking
send it to Andrew at Vectorwise he’ll get it done for you no probs.
-
spot on Andrew :):)
apart from you spelt power wrong 😉
-
LOL you cheated you posted both at same time
🙂 well done Andrew
-
LJ has his u have 11 mins to go 🙂
-
I’ waiting ………
:lol1:
-
I can John and he is 🙂
np Niki
hehe
-
Yep thanks Niki & John
thats the thread i thought the logo was posted 🙁 ohh well off to vectorwise i go 🙂
-
Thanks Dave
I’ll try that in the morning
i think your right about a glitch, as i havn’t had a prop with PS2 b4.
Thanks Again
-
Hi Dave
Just finished printing as i read this, i saved as postscript 3 and it printed fine 🙂 so happy bunny now , and thanks for the arrow tip that worked a treet, using that for the next one.
i did try saving as a tiff but it wouldn’t let me go the whole length it sqaushed it. and i cant save as a pdf the option isn’t there.thanks for you help it seems ok now.
-
Hi Phill
checked that first and def havn’t.
just re ripping as post script 3 and going to try that.
-
Hi Dave
The print head stops in it’s start position, the print edge is crisp as if that is where it should have ended, and the machine then inches out to the end.
i have found a thread that said in corel 12 save as postscript 3 so i’m trying that as i was saving in 2.
also what is wierd, when i save as a eps i have a arrow with a boarder, the black inside part of the arrow has a nice sharp point , but the outise boarder has the end cut off. in corel it looks fine but ones ripped it isn’t
any ideas?
-
45% (Yankee). Barely in the Yankee category.
most of them i guess’d at 😕