Forum Replies Created

  • Barry Coles

    Member
    May 12, 2006 at 10:19 am in reply to: price it guide

    For anyone interested this is the link.

    http://www.priceitsignguide.com

  • Barry Coles

    Member
    April 7, 2006 at 3:10 pm in reply to: is there a mactac supplier northwest?

    Try APS

    http://WWW.allprint.co.uk

    According to the book they will deliver to your area.

    Barry

  • Barry Coles

    Member
    March 25, 2006 at 9:18 pm in reply to: More Font Help – I need an Expert!

    think you will find its called Biscuit or also known as Bison.

    Barry

  • Barry Coles

    Member
    March 24, 2006 at 8:48 pm in reply to: Brian Little – gone a bit quiet.

    Good to see you back, look forward to the weather reports.

    Barry 😀

  • Barry Coles

    Member
    March 24, 2006 at 3:41 pm in reply to: can someone help with a cutting problem please?

    Brilliant !!! just tried it all OK now.

    Thanks very much.

    Barry 😀 😀 😀

  • Barry Coles

    Member
    March 21, 2006 at 4:39 pm in reply to: Help needed with font ID please

    I think its Almshse .

    Barry

  • Barry Coles

    Member
    March 20, 2006 at 9:34 am in reply to: Simple Wrap job!!!!

    only two more

    Attachments:

  • Barry Coles

    Member
    March 18, 2006 at 4:18 pm in reply to: Illegal software on Ebay

    Well done !!! I paid full whack for my Signlab so should they.

    Have you seen the Flexi for £45 got this message back from him when I checked him out some weeks ago………..
    Item: FLEXI SIGN CAD SIGN MAKING PROGRAMME
    This message was sent while the listing was active.
    ***** is the seller.

    this is a copy and will enclose a second disc with the crack on it very easy to do
    if still interested please contact

    He is still selling !!! only 4 available ???

    Well done again.

    Barry

  • Barry Coles

    Member
    March 15, 2006 at 1:59 pm in reply to: Something Horsey needed

    Is this any closer?

    Attachments:

  • Barry Coles

    Member
    March 15, 2006 at 1:28 pm in reply to: Something Horsey needed

    Cant find anything on file, but have you tried this link lots of horses not sure the type you want?

    Barry

    http://vector-images.com/search.php?que … pe=clipart

  • Barry Coles

    Member
    March 15, 2006 at 9:33 am in reply to: Cleaning mirror polished steel

    Stainless steel is a very tough product and stand up to almost any solvent but not all acids the best product I have found for cleaning and keeping finger marks under control is marketed by 3m and should be available from welding supply shops its called Stainless Steel Cleaner & Polish if they don’t stock that one they should have a alternative. I have tried the oil methods but find they attract more dirt long term. Hope this helps.

    Barry

  • Barry Coles

    Member
    March 15, 2006 at 9:09 am in reply to: why does the tool bar keep dissapearing?

    Hi Alan, I have just re started my system and the bars have remained!!!!
    I loaded this program onto two laptops when I got it and have just compared the toolbar set up in both machines, the working tool bar on the original set up has 18 tools on it ,on the machine I use constantly and have had the problem with this toolbar now has 4 of the original tools so why/where they went pass!!! I also set up 2 extra toolbars on the main machine and they have gone completely! Very odd!! Lets hope they all stay put from now on.

    Thanks for your help.

    Barry

  • Barry Coles

    Member
    March 14, 2006 at 7:51 pm in reply to: why does the tool bar keep dissapearing?

    What I also find annoying is that they have known about this problem for some time but make no mention of it in the handbook ( which I find a bit thin to say the least ) and when you consider the cost I think they should be a bit more generous with the info. Does anyone know of any books that are available, I have checked the web but no luck yet.
    I would have to agree with Peter Normingtons idea of a special forum on this site to cover these programs as there must be lots of info we can share.

    Regards

    Barry

  • Barry Coles

    Member
    March 14, 2006 at 5:16 pm in reply to: why does the tool bar keep dissapearing?

    Had a reply from Cadlink it would appear to be the problem of floating tool bars they have to be docked or they will go! By “docked” it means hard against the current tool bars not just in the area. Also if you move existing tool bars make sure they are docked or they might go as well.

    Regards

    Barry

  • Barry Coles

    Member
    March 14, 2006 at 4:10 pm in reply to: Mark 2 outline

    I think this is the model but not much of a outline.

    http://blueprints.onnovanbraam.com/modu … hp?nr=6065

    Barry

  • Barry Coles

    Member
    March 13, 2006 at 9:28 pm in reply to: Forex Supply

    I just got 4 sheets of black 5mm cut to size (lots of different sizes) for £32 a sheet from Amari. ex vat.

    Regards

    Barry

  • Barry Coles

    Member
    March 13, 2006 at 11:38 am in reply to: Rheingold ttf

    No , though I have been compared to a few things in my time (some repeatable). Glad you got the font sorted.

    Regards
    Barry

  • Barry Coles

    Member
    March 13, 2006 at 10:48 am in reply to: Rheingold ttf

    or this one looks like its free, not as ornate os the one on Myfonts?

    Barry

    http://fonts.goldenweb.it/pan_file/l/en … fault.html

  • Barry Coles

    Member
    March 13, 2006 at 10:42 am in reply to: Rheingold ttf

    Myfonts got it (cost you $12 though!!!)

    http://www.myfonts.com/fonts/scriptorium/rheingold/

    Regards

    Barry

  • Barry Coles

    Member
    March 11, 2006 at 4:09 pm in reply to: Did anyone else get this e-mail

    Still got the thing if you want to see it?

    Barry

  • Barry Coles

    Member
    March 11, 2006 at 1:11 pm in reply to: Did anyone else get this e-mail

    Yes I got that one! no details in the cc .

    Some bloke in Lagos Nigeria

    Regards

    Barry

  • Barry Coles

    Member
    March 10, 2006 at 9:38 am in reply to: why does the tool bar keep dissapearing?

    Hi Alan, yes I read that too but I am the administrator for this machine so it “should” be correct . What wonderful things computers are !!!!!!

    Thanks for your help

    Barry

  • Barry Coles

    Member
    March 10, 2006 at 9:30 am in reply to: EZY TAPER (DEMONSTRATION)

    Good point Peter, How many great products fail through poor marketing and backup!!!!!!!!!

    Barry

  • Barry Coles

    Member
    March 10, 2006 at 9:21 am in reply to: why does the tool bar keep dissapearing?

    Still awaiting response from Cad link but on studying the forum it would appear that they have had this problem for some time but do not consider it a priority to solve it. I do find it frustrating that they charge top money for these programs knowing that they have faults!
    Having said that I am very impressed with the rest of it and is a very good programe for what we do and a marked improvement on my Coreldraw. I will just have to learn all the hot keys!!!!!

    Barry 😮

  • Barry Coles

    Member
    March 10, 2006 at 9:11 am in reply to: EZY TAPER (DEMONSTRATION)

    I have had the same problems does anyone know the price??????
    I have seen them advertised in Australia (long way to post it!)

    Barry

  • Barry Coles

    Member
    March 9, 2006 at 10:01 am in reply to: i am after some Vinyl Application fluid advice?

    All Print sell it.

    http://www.allprint.co.uk

    Barry

  • Barry Coles

    Member
    March 9, 2006 at 9:12 am in reply to: why does the tool bar keep dissapearing?

    I have sent a email to cadlink I will post the outcome.

    Regards

    Barry

  • Barry Coles

    Member
    March 8, 2006 at 5:07 pm in reply to: why does the tool bar keep dissapearing?

    Thanks for the reply, checked as you suggested it is build 4, tried to contact cadlink uk but no support available today.

    Regards

    Barry

  • Barry Coles

    Member
    March 6, 2006 at 9:39 am in reply to: Vehicle Outlines by Ingram’s?

    Just click on the add on the front page for Impact.

    Barry

  • Barry Coles

    Member
    February 28, 2006 at 6:06 pm in reply to: Epson printers ??

    I have a Epson 4000 which I use for photographic work it is very good and the print life one of the best you can get , however that is on photo paper. According to the web site quoted the media suggested is Duragraphix which I cannot trace from the UK . If anyone knows of other suitable media I would like to give it a try.

    Barry

  • Barry Coles

    Member
    February 25, 2006 at 5:07 pm in reply to: Any ideas on this font

    Cracked it !! well done have been looking for this one for a long time.

    Many Thanks

    Barry

  • Barry Coles

    Member
    February 25, 2006 at 4:29 pm in reply to: Any ideas on this font

    Tried that one too square at the base of the letters.

    Thanks for looking

  • Barry Coles

    Member
    May 13, 2005 at 7:10 pm in reply to: Members Websites

    I have seen what you mean it disappeared a few week ago it listed all of us by type IE demonstration etc and listed all the details of members, location, web site details and allowed you to pm them from this area.
    I accessed it from the top of the front page near to FAQ and board rules but I cant remember what it was called.

    Regards

    Barry Coles

  • Barry Coles

    Member
    May 3, 2005 at 7:44 pm in reply to: Missing ads of front page

    All OK cracked it Norton has a add blocker hidden away. Turn it off all works fine.

    Regards

    Barry

  • Barry Coles

    Member
    May 3, 2005 at 7:37 pm in reply to: Missing ads of front page

    Hi have been having the same problem even with the firewall switched off !!!

    Any other ideas?

    Barry

  • Barry Coles

    Member
    April 26, 2005 at 5:10 pm in reply to: doming supplier

    Yes I saw him too he was called Likwidart .com, tried his product very good but watch out fir the limited shelf life, only 5/6 weeks and you can do a lot with the 10 tubes that you have to buy so you need to be set up ready with a lot to do.

    Regards

    Barry

  • Barry Coles

    Member
    April 6, 2005 at 7:12 am in reply to: Possible Geuine Printer Bargain On Ebay

    This item or very similar was sold recently for £1141.oo Item no 6752126392 check out the wording and photos on both items. Different seller different location??????????

    If it is OK it will go for a lot more or is it the same one that does not work?

    Regards

    Barry

  • Barry Coles

    Member
    March 30, 2005 at 6:14 pm in reply to: ebay too good to be true?

    Looks like another just to good to be true!!

    Checkout item 7504680345

    New listing , no feedback, no bid history details.

    Barry

  • Barry Coles

    Member
    March 30, 2005 at 6:07 pm in reply to: ebay too good to be true?

    Just checked eBay item has been withdrawn by eBay !!

    Another one bites the dust!!

    Barry

  • Barry Coles

    Member
    March 29, 2005 at 5:18 pm in reply to: Old Esso advert oil drip man request

    Remember them well!! used to work for them in London in the advertising dept when they were doing all that!

    Just looked up the price of key rings on eBay got loads somewhere must go rumaging .

    Barry

  • Barry Coles

    Member
    March 28, 2005 at 8:21 pm in reply to: ebay too good to be true?

    See what you mean ! no feedback !! no pay pal !! will watch with interest

    Barry

  • Barry Coles

    Member
    March 17, 2005 at 10:33 am in reply to: ITS GOT TO BE A SCAM ISNT IT ?

    Not bidding yet, I wait until the last Min’s and sometimes use sniper software (very effective) . From all I have read so far I feel this might be genuine, seems to know her stuff and all she is selling seems to show a complete setup up for sale.

    Will keep watching!!

    Barry

  • Barry Coles

    Member
    March 16, 2005 at 8:30 am in reply to: ITS GOT TO BE A SCAM ISNT IT ?

    I have checked on her feedback comments she has only purchased items and has no feedback on selling ! she also buys lots of small items ( one hell of a lot of knickers ) take a look for your self!!!!!

    Barry

  • Barry Coles

    Member
    March 15, 2005 at 12:47 pm in reply to: Building a new workbench

    Machine Mart do a good selection of wheels in rubber and nylon give them a try.

    Regards

    Barry

  • Barry Coles

    Member
    February 12, 2005 at 7:36 pm in reply to: BEST BUY ON A BUDGET?

    Yes Paul, I have Coreldraw also but find it a bit limiting when it comes to outlines etc maybe I need more practice.
    I am hoping that a dedicated sign cutting program will give more options.

    Regards

    Barry

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .