Forum Replies Created
-
hi thanks 4 the crits, the company wanted the text in red, yellow and kumquat, there wasn’t any scope for changing text colour, i only had to create the logo for them.
they were well pleased at the result, also i got roofing companies 4 vans to design on the back of the jif van, as they liked the end result, just shows everybodys taste is different i guess.frank
-
Look at the epson acculaser 1100 colour, £249, £50 for toner .
Picked one up last week real treat, print quality brill.Frank
-
Thanks for that Nicola, image just round the corner from me and theres a beauty salon and i never thought of popping in there, stupid or what doh 😳
Peter for ref: http://www.fakebake.co.uk
Thanks will pop into tomorrow to salon and get beauty treatment ( haha)Frank
-
Hi Peter,
it’s a false tanning product.
You get sprayed with fake tan rather than shrivel up using the sunbeds
Hope that makes sense (?) -
Thanks Terry
I thought that as well, but customer said it was yellow background, i will give him the option of using yours or changing the background yellow.Thanks again mate
Frank :appl: -
Cheers Terry
Your A star
thanks that will do nicelyFrank :2thumbs:
-
Cheers guys, will phone the companies tomorrow, thanks for helping me out of a sticky situation (no pun intended lol).
Frank
-
looks like nobody knows of a supplier of adhesive tape then,
thanks frank -
Graham
Try Boldscan, good wall bracketsFrank
-
Thanks to,
Zorroxrn and Paul Rollason.
Just what i was looking for, cheers mateysFrank
-
try these
-
Cheers Peter
Think it may be a big job, so will buy a similar looking font.
Thanks for infoFrank
-
Cheers will bear that in mind if anybody wants one done, but looks good and fraction of cost of contravision i bet.
Frank -
nice pic Goop,
whats it like filling the entire window, is it harder than the oval shape you created.frank
-
Cheers John,
have you done any full wraps on the tx 11,
looking for pointers as this is our 1st one, dont want to screw it upFrank
-
Tried a few local scottish companies that supply the taxis but to no avail, thats why i’m asking on here, as more chance a signmaker will have a copy they can post to the file forum.
Frank -
The TX11 has different body panels.
frank -
Go to Ashbys, got some last week really good, and cheap.
Frank
-
If its an edge two, there is a small recess beside the power cable, this holds two extra fuses, one is a spare, check them out, not just the fuses in the plug, the fuses will cost 50pence.
Frank
-
payads
MemberApril 4, 2005 at 8:48 am in reply to: Gerber Edge Settings for printing photo images…..plz help!phone 646999
be in office this afternoon.Frank
-
payads
MemberApril 3, 2005 at 2:06 pm in reply to: Gerber Edge Settings for printing photo images…..plz help!Give me a call Monday and i’ll show how to do it
Frank -
Cheers for that magpie,
I had alook at them on google but the client isn’t totally overjoyed with the detil of the images, he has asked for a couple of other samples.Typical shop owner, you trawl throu tons of images, but they are still not the one for them??
strange world.
Frank
-
Yes no probs Nik, thanks again.
Frank -
Cheers for that nik,
Had alook at my wifes Jamie Oliver book, but alas only meals there. im afraid. I’m TYPICAL MALE, no need for cook books haha, fast food junkie.
If you could email one that would be great, when you have time.Thanks Frank
-
thanks James for info
frank -
cheers matey
Frank
-
cheers vivid
will give them a go.
frank -
Cheers Martin
Thanks for your info.
The patons 200tw is a brand new vehicle, just came out on production this year.
Have spoke to the area salesman, and he’s only sold 1 in Dundee so far.
Guess i’ll have to do a lot of measuring.Frank
-
Cheers guys for all the valuable advice.
The icons were re-creatred, the t in control is taken care of.I have explained to customer about black text, so will go with what they want.
Anyway when the job is finished I will post it to the forum.
Cheers Guys.
Frank
-
payads
MemberFebruary 14, 2005 at 11:04 pm in reply to: can anyone help please with graphic layout?youv’e always got to push the envelope nigel.
Just my way of thinking, try and do a job as easily and quickly as possible.
will end up doing the way you, rob and nigel suggested.
So thanks for ur assistance.Frank
-
payads
MemberFebruary 14, 2005 at 10:52 pm in reply to: can anyone help please with graphic layout?peter, nigel
yes makes sense what ur saying.
Im looking at time for applying and creating graphic.
As your aware it could be installed in minutes if it were in one piece.if you only have one piece of vinyl to install, why not try and do that, rather than create individual boxes and text lines.
thats what im trying to produce, something that in one piece, walk into shop, walk out of shop 5 mins later, job done.
thanks forr your imputs lads much apprieciated.
Frank
-
cheers nigel, rob have posted it in other forum to get some views from members.
-
payads
MemberFebruary 14, 2005 at 10:32 pm in reply to: can anyone help please with graphic layout? -
agree with what your saying, but there has to be an easier way to do this job.
If I could upload the graphic you could then see the reason why im looking for it to be done in a oner.why dont i have the upload file function anymore, its disappeared
Frank
-
No thats no good Rob, I would submit a graphic for better explanation, but the add attachment isn’t visable.
where has it gone
Help Frank
-
Cheers guys,
will try tips
Frank -
ok will see what i can do
Frank -
Boab
how much for cutter and software only
pm me might be interested
Frank -
Cheers Peter,Will just create them
Frank -
Cheers peter,
I was looking for the icons that say email, internet, my documents.I have tried screen shots but not good enough as the final print size will be aprox 6in*6inch.
Anybody got any ideas.
Frank -
payads
MemberJanuary 18, 2005 at 9:17 pm in reply to: supplier please of free standing banner please?Dewi
With all the high wind have you considered using mesh to print on rather than solid banner, just as inexpensive and great resuls.
Frank -
Cheers Guys, initially looking for 10,000 to be printed
-
-
Give Iain Somerville a call 07816663816.
He specialises in commercial vehicles Scotland and North England.
If he cant get you the deal you want no-one will.
Tell him Igave you his details, he owns business vehicle contracts.Frank
-
Cheers rob
never done ali signs before, will go back to customer with size guide.Frank
-
Cheers Marcella
your an angel (angel)Frank
-
payads
MemberOctober 24, 2004 at 5:48 pm in reply to: Is there any regulations that inhibit the forth emergency?Cheers Big g
Thanks for the link.
Frank -
There was on ebay last week, went for $4200, (£2200) edge two.
There are only good for specific prints.
You may be able to pick up a bargain, but remember check its working if theres another going for sale.
Frank -
nik
yes have tried them they can only supply 8 X 4’s if they get another supplier to supply them there wanting £35 per sheet and i want 16. looking for a bit of cost saving. ta frank
-
junior, if you let rip, ur going to the back.
-
martin
select vehicle the go to fill then select no fill the image will now be clear go back into fill then assign it any colour you want.Frank.
-
payads
MemberAugust 31, 2004 at 7:18 am in reply to: which vinyl can i use for large format prints?Cheers
thanks for the info john and rob,
confident the supplier will be happy with the finished job, now that I have the correct info.Ta Frank.
😉 -
Hi Big G
i’m making two for a client, thing to watch out if making them from old caravan chasis, theres a new law law coming out in sept/oct where the police now have the power to impound them if they are made up of old caravan trailers, some of the trailers you see are mega cobbled together by clowns. Use a reputable fabricator.
Take it coppers, are cleaning up the roadways.
I’d get one done for you but Im to far away from ur area, cost you more transporting it down south.Frank
-
Steve,
yes should have been more clearer, what Im looking for is:
Ducati Supersport 900 logo.
If anyone has any idea where I can pick it up would be greatful.
Tried various bike websites and brandsoftheworld link but to no avail.Thanks Frank
-
Hi Sandy 🙂
welcome to the boards, tons of advice available from lots of quality guys and gals.
If your seriously interested in an edge/ composer, we may be upgrading to a large format printer in the next few weeks, and if so will be selling our edge2 on.
Give me a call if u want any more info.
Frank
info@payads.co.uk -
payads
MemberAugust 4, 2004 at 11:41 am in reply to: Looking for a supplier of clearvision/contravision please?Cheers chris
Yes Ive an edge, fed up with hole stuff looking for slit stuff.How do you do it on ordinary vinyl (?)
Frank -
Thanks saved me life.
(hot)
frank -
Dewi
Don’t know what printer u use, I use an edge.
the edge automatically finds the registration for printing in layers,with a little tweeking!.
Can u mark the vinyl (ink pen) print the white , then bring back the vinyl to the original start point then print the other colour!!frank
-
Dewi
the colours are mixing to give you a queer colour.
try printing down a white backgroung onto the yellow then print the green on top of the white.
Frank -
cheers Kawy
just the very job (hot)
thanks
Frank -
dave
how did u get on with your photo for edge
did u get a good quality resultFrank
-
Dave
import image from coral.go to options in omega
select your image editor (put this as coral or whatever ur using) this will allow you to edit the image in composser and coral.
u can then import image using file import button etc.once u have the image ready to print select all then go to set up in composer : device select, print mode, u can now use 600*300 dpi for clearer prints.
you can also hit the 123 icon and change the halftones.
For photos use photowork either, fine or long( fine for veiwing close up, long for veiwing at a distance.if you play about with these settings you will be able to change lines per inch etc.
Happy playing with your new toy….
-
thanks rob
nice to know signlab 7 isFrank
-
Dave
if its for grpahic images, the go for cast vinyl rather than calandered.
Transparent, white or coloured are good 751 series.
I use europoint for the cast not had any problems.Frank
-
Dave
Iv’e an edge, never worked with signlab though, are you wanting to print bigger than the 298mm width for the the edge, bit confused what your wanting to do…Frank
-
Rob
I’ve udes and edge for 2 years, graet machine can do wonderful stuff from decals to big stuff. There foils are expensive, £75 for cmyk and £70for solid. There are suppliers that do them for £44.00 ive used them for over a year and had no problems with them.
If you want to save money drop me a line.As Ive said graet machine but consumables are expensive from Spandex.
Frank 😉 -
Cheers lamby
just what I was looking for:2thumbs:
frank
-
Hi
Appears to me that a lot of time is wasted by creating van graphics in layers, applying wet / dry etc. (each job has its merits for dry/wet)
I believe that a job like you are describing would be best produced by an edge. Everything is created on one layer hence no problems with layers.
Appriciate that different cpeople use different printers/plotters etc.
Can the graphics be produced by an edge owner, they may cost you and client more, but saves a heck of a time. (!)Time is money, less problems to contend with.
Frank
-
Thanks for the tips Joe
Went along to b&q for the paint and cut mdf to size.
Boards are up and clients likes them.
It was the first time I’ve made them and I was very surprised how easy it was, and a teriffic mark-up
Frank 😉 -
Cheers Terry
Abount to start them, (5) Bet I’m going to end up with most of the paint on myself, here goes.
😆
Frank -
Cheers guys, great tips :thumbup2:
Away to make these boards tomorrow
Frank -
Spandex do a clear and a white static, from 10meters upwards think its reasonably priced
Frank -
Cheers Mike 😎
Its the 1991 model, ive got an edge 2 so will be able to colour decals. He uses it mainly for road, but like most bikers tends to take it off road whenever possible.
Is there a difference between decals for road bike and off road !!Frank
-
Cheers Guys
😉 will give both a go, fingers crossed 😉
Hourly rate has gone up to £75 ph.
Good having all this knowledge on the boards, saves small companies paying a fortune for blowing out dust.Mind you I might ask gerber if there any jobs going for blowing out dust.
Thanks Frank -
Van looks really good, p.s can you send some of that sunny weather up to scotland..
-
Hi Mark
I use the 2003 version of Mrclipart
To scale up to correct size use 1000% then 200% that will take it to the correct size of vehicle.
Goodtip, the actual size is shown for each vehicle, once you’ve scaled it up, use your drawing tool in your software to draw a line the length of the vehicle, check it, should be the same as what is down on the template.
You Normally get a 5 to 7 mill difference when scaling up.Good luck
frank 🙂
-
Cheers Dewi
Better get cracking on 🙂 -
Hi Rob
Yes I should have been more clearer.
I need to create indoor shop menu, using 3mm pvc board.
I was wondering if there is anyplace i can purchase blank shaped cut pvc boards. Not confident in creating my own design and have no cutter to cut pvc board.
The boards will be secured on to wall. Naturally I will attach digital graphics to boards to show range of food that is sold in the premises.Frank
-
Hi Trevor
I ve got a spare edge and the omega software to go with it, yours at HALF THE PRICE OF A NEW ONE.
Don’t know if you want to lay out any capital seeing your partner has done the split.Frank
-
Hi Frank Here saying Hi
(admin edit) please use proper forums for these requests!