Dave & Rob Lowery
Forum Replies Created
-
🙂
-
Or this one?
-
Dobro došao/Dobro došla 😀
-
You have use of the best machine (edge) with cutter for doing small labels. With a spot colour printed these should last 5 years outside.
Good luck and bob into the say hello forum and let us know a bit about you. Post a piccie at the same time, it’s nice to see who we are chatting to. 🙂
-
A&P do Avery
For MacTac phone 0161 872 5666 (Pyramid) -
This is the only one I have
-
SPANDEX!!!! ARE YOU MAD!!!!! ARE YOU THE WINNER OF LAST WEEKS LOTTERY!!!!
Tel: A&P Display – my local branch is 0161 876 4050 but they do have other branches
-
Cast :yes1:
-
Hope these help
-
Can’t do layout at home but would be tempted to use a pair of scissors for the "y" in taylored and drop the cap "S" in CUTS lower than the rest of the wotrd and put a barbers pole up through it i.e. under the bottom part, over the middle and top part. That is if it is a unisex salon. Just an idea, going back to my drink now (drink1)
-
Won’t open in Adobe CS, Troop or Omega. 🙁
-
Here’s what I did.
Got the angle from B&Q.
Attachments:
-
Hi Paul and welcome to the madhouse 😀
If you are stuck for anything specific i.e. drinking glasses, tibal art etc. you can just ask in the forum, as long as you are a paid up member. We can then all try and help.
-
Just think Shane, had you not gone on holiday in "Aussie Time" but in "UKSB Time" you would have been on holiday for 12 months!!!
(UKSB Time: File store and Babble forum closed for 1 week – that was 6 months ago) 😀
-
quote Marcella:the rum is 150% proof ……. I ain’t trying it!!!!
Told you she is a Wuss 😀
-
Welcome back mate, glad you had a great time.
Bet you are looking forward to getting your credit card bill :lol1:
-
Flooreeda Fabrications on 0161 442 3551
or
UK Point of Sale on 0161 431 4400 -
Go on, say what you feel George 😀
-
Thanks for the update Marcella….you really know how to rub our noses in it 🙁
Have a great hol and have a large rum for me *drink*
-
Hi Neil, Welcome to the boards.
I run Omega here as well so post any probs you have and if I can’t help, someone else surely can.
Good Luck
-
Welcome Ben, :wave:
You should find loads of help on here should you get stuck.
Where are you based and what is your background ?
-
Or thise (?)
-
Any Use (?)
-
Thanks for your help once more 🙂
-
Any Use???????????
-
Ta! 😎
-
Tried putting it through Conversions Plus and it doesn’t recognise the file whatsoever 😕
-
quote Robert Lambie:you shouldnt need to pay rates as its portable…
YOU TIGHT GIT!!! 😀
-
Well we can all see your puppies so how about cats or as Mrs Slocham would say " show us your ….. errrr " 😳
I’ll get me coat
-
Customer has got to be a "Designer" 😕
-
Won’t open in Paint shop Pro, Omega, Adobe CS or Troop, Sorry 🙁
-
Try Rossborough insurance brokers in Guernsey. Sorry, don’t have number to hand.
-
Tradesingz
-
Welcome Julie, Good luck with your canvassing. Hope all goes well
-
quote RFKSolutions:I basically just wanted to learn a bit more about the whole sign business and a bit more about the products , so I know what I am selling. 😀
Are you sure you are on the right site :rofl:
Welcome to the boards ???
It would be nice to have a name 🙂
Dave
-
Chain his ride on lawn mower to a tree and hide the chain. See how far he gets bofe he is catapulted over the wheel 😀
-
There is one thing Nigel, you don’t look 40…
Although you used to :rofl:
-
You’ll start losing your hair next…ooops… too late 😀
-
welcum two thee bords 😀
-
Hello Cheryl :welcome:
And you’ve posted a piccie :love:
-
How about supplying your customer with banners with loops top and bottom and he can then bolt a couple of pieces of scaffolding out to hold them.
-
Get in touch with your local licencing authority at the council and they will point you in the right direction. Explain to them that he is asking for magnetics as our council will not allow this as anyone could remove them and put them on their own car. Think safety! How many times have you heard of some woman getting in a taxi and being attacked later on!
-
Hi 😀
-
Try selecting the text and bringing it to the front – usually ctl page up.
It may be your image is to the front, so covering the text.
-
My engraving machine can be set up to drill 1mm holes and we then drop the beads in and tap them with a lickle hammer. This locks them in and stops them coming adrift.
-
try "letmein"
-
is this the one?
-
I wish I was in Dixie, hooray, hooray 😀
-
Welcome Lee,
If these boards shunned for stupidity, there would be no one on them 😀 -
Welcome Mike,
So son wants to come and work with you?
My son works with me along with my wife and it’s great.
Keep it in the family – have empolyed staff before and when you get them trained up, off they go!!!
With family, you have that bond that holds you all together.
-
quote Robert Lambie:Ill be driving a plain white sprinter van with FastSigns on the sides and rear.
logo is in blue and green…. same as on the cherry picker.
😉WHAT 😕
-
Any good?
Attachments:
-
By the sounds of it, a good bank manager and a large overdraft facility 😀
-
Hexis supertac S5000
Metamark
KPMF -
Prism acylic is like loads of small diamonds on the surface of the acrylic that refracts the light.
-
B&Q have some tube in 1220mm lengths that we have used. Just cut them to the desired length. Cheap and Cheerful
-
£35 per hour (incuding travelling time + 30p per mile.
-
I would be tempted to cover the rear of the panels with white translucent vinyl and see if that is the cheap way to get round it 😕
-
Sent you a PM
-
Find which letters are going into and out of the recesses and stretch those so it doesn’t deform the characters to much.
-
Where are you based Anthony?
-
Cooksons in Stockport do one with rubber underneath to prevent slipping and a handle in the centre to stop you trimming your nails 🙂 Unfortunately their website is down at he moment but they can be contacted on 0161 480 2388.
JTF Warehouses also do one the same but with no rubber underneath but they only cost £2.95 + V.A.T. Don’t know if you have one in your area (?)
-
Always find Pantograph Services in Leeds great on repairs and servicing.
Contact them on 01132 496161
Don’t be put off by the name, they also service computerised engravers.
-
Think I’ll nip down to the local toy shop and clear their stock 😕
-
Humbrol which is part and parcel of Airfix is also in deep do-doos laying off 31 staff out of 41 😮 This may cause me some probs as I use Humbrol quite a bit when infilling brass plaques 😥
-
Panel wipe from most car paint supply companies.
-
It’s just that we need to get out more 😳
-
Only got the various eurosyle fonts as gcs fonts (for gerber output) :sigh:
-
Comptative and 365 days looks like Eurostyle to me
-
Any Use?
Attachments:
-
Times New Roman 🙂
-
Apparently this material is lazer cut to seal the edges, nightmare on a plotter as the top clear edges tend to peel away if caught.
-
Try these
Attachments:
-
any good?, Rob.
-
Any Good?
-
quote Dave Rowland:kerb-crawling i think.
Is this the voice of experience 😀
-
It’s like the spellcheck, every time I put in pavement, it changes it to sidewalk 😀
-
Hi Richard, saw your post yesterday and started looking for you this morning then saw your follow-up post 🙁
Remember when looking on clipart sites that they are usually american so think american…. not football but soccer 🙂
-
Welcome to the boards Glenn. :wave3:
-
Welcome to the boards James. Enjoy!
-
I always use hilti hits for this type of job (single handed).
Drill 1 hole to suit in the frame, then one in the correct position in the wall and fit the hilti into it and hammer home. this will hold it in place whilst you can then drill and fix at your leisure.
-
Welcome aboard Tony. Any problems, ask away 🙂
-
Welcome to the club 😀
-
Now Carrie, you know I have a soft spot for you…
A Bog in Ireland 😀
-
Hi Marcus, welcome to the boards. Not many of us engravers on here although I only engrave plastics and brass etc. (anything flat that is)
If you find time, post a piccie because the devil incarnate (Carrie) will be on your case 😀
-
PPPSSSSSTTTT…..want to buy an acurate clock…Will save you £££££’s 😀
-
:yes1:
-
Perfect, Cheers Gary 🙂
-
All the best Rob….I still think your kids will grow up before you 😀
-
here you go….
-
No 🙁
It’s the standard triangle but it has a roll of barbed wire in it.
Thought i could get away with that but he has seen this one. 🙁
-
Yes, use for acrylics as well.
Can’t you tell I’m a tight barsteward 🙂
If her indoors gives you any trouble, give her a slap 🙂
-
Bog standard wood bits do the job. Bear in mind how thick the aluminium is of the material….thin as a gnats prick
-
I use a DeWalt router for scoring before folding and a Excaliber for cutting
-
Here you go Alan..
http://www.brandsoftheworld.com/search/ … _id=142011
or
http://www.brandsoftheworld.com/search/ … _id=142011
Why not pop into the Hello section and introduce yourself 🙂
-
la mierda sucede
-
Your Right George…..FUTILE
-
White on White?
All white?
Email it to me, let me try
-
quote Jill Marie Welsh:CAN YOU HEAR ME NOW MARCELLA???
SSShhhhhhhhhhhhhhhhh. She’s a little bit busy and distracted at the moment :lol1:
-
Now you never mentioned food 🙄
Found these, got 100’s to go through.
You could shove a burger in one of their hands 🙂