Forum Replies Created
-
i’m now Known as
“Now pig aloud.”:lol1:
-
I looked on brands of the world but no luck sorry
-
Don’t use the jig to line it up with. do that by eye with the blank on top, use a liitle bit of pressure first to juust lay the acetate onto the blank, then once on right run through again with more pressure.
trim up all done.
i found the jig itself pulled the plates through skewif if u havn’t got the pressures bang on, so i just eye it up and use light pressure for the first run. if it goes a tad off u can normaly then pull it off and try again, once u get the nack it’s easy.
-
Rod
how long does it take to dry and can it be put back in teh cutter after to conour cut??
-
Quoting a big job up and designing another 😕
-
nm Sussed it.
bit long winded if anyone else is having probs let me know and i’ll help out.
-
Does anyone know how to set this up using Wasatch v5.1.3 Troop V5??
pulling my hair out here, i dont think it can be done.
-
Missed you………….
who are you (?)
i did know a guy called LJ.
but not l.j. must be a new guy :lol1:
-
Nik & Lynn
John says thanks for looking , he can’t reply himself as he can’t log on atm
gremlins have attacked :lol1:
he still needs it though if anyone else can help
-
Same Here John
the ZKS is a little like Lumparskyit may be a job for andrew, but he did want the bullet points in teh same font if poss.
-
I saw them back way yonder 🙂 on teh tour where keith richards cut his thumb and it was cancelled for ages, mid 90’s i think it was
very good
but not a good as Queen 😎
-
Hi Shane
i’m using 12 here and i set mine to a cut path, use it as a hairline and it’s fine ?
-
Confusing isn’t it Rob… 😕
-
Hi Guys
Cracke dit with all your help thank you 🙂
i saved as a eps ( i did do thi sthe other day but didn’t play with teh settings )
opened in corel and noticed that the shading had gone, but as it was a vector filer i could moved the layers about and i got the shading back 🙂
put my cut path around saved as eps, it prints loverley 🙂
Thanks again all
-
Cheers Rodney will try that 🙂
-
Rod it can open it, but thats as far as it goes.
and do i want to cut out by hand 120 400mm circles??
-
Thanks Dave i’ll give that a shot in teh morning
Paul
-
I can do that Becky.
But i cant put the cut path i have made in with the pdf file.
as soon as i try and open up the pdf in anything apart from adobe acrobat it looks cak 🙁
Troop DX can do it 🙂 but i can’t inport that into anything that i have to use it 🙁
I WILL FIND AWAY
-
Yep no problem Rob 🙂
and thanks for looking into it for me.
-
Thats what i did Peter but the shading on the outline imports in as lines and looks terrible 🙁
-
Nice website 🙂 well laid out and thoughtfull
I know nothing about building webbies 🙁 got a m8 doing mine atm
-
Yep 🙁
I can get it into corel, but the image looks terrible around the shading, compared to the pdf.
i can print the pdf if i open it straight into troop no probs but i need that cutpath
-
Having spoke to the sales Person
All sorted….. you can put contour round in SL.
and other probs sorted as well.
-
Hi Guys sorry for the late reply my Internet is down at home:(
They did know that i was selling my old machine and i was told that i wouldn’t have any problems, also i was assured that all the companies were selling the same deal……
So how is the same deal with different software?
Ok it is the latest version which does print great ect. but my bread and butter work i now have to go through hoops to do. which in my view is not realy on
I knew i couldn’t use my old program. and i would have to manipulate my old designs to cut them , that isn’t the issue.
It’s all my new stuff i just can’t do as easy as i feel i should with a 10k machine.
i know i got a good deal with teh consumables but i’m definatly let down with the software which i feel i was led to believe would let me do my day to day stuff as well. The engineer who instaled it even said i can’t just CUT from the machine ffs. he said i would have to turn everything to white. pretend to print it then cut it??
I had to sort that out myself with a call to a local competetor !!
and not returning my calls? ok the salesman has just got back from holiday on monday, ok so he has heavy load on, but a call takes 5 mins , i feel let down and it’s now as if they have their money i don’t matter 🙁
-
Paul Goodwin
MemberMay 17, 2005 at 7:27 pm in reply to: can anyone advise me where i can buy a cadet please?What rip did u get with it higgi?
-
As Rod says.
Felling a little let down with the software. Means i have to learn Corel which i hate with a passion. just to do my basic cutting with.
Machine is great though just the software isn’t what i expected tbh
-
Paul Goodwin
MemberMay 17, 2005 at 5:46 pm in reply to: can anyone advise me where i can buy a cadet please?Hi Peter
the machine is great, not too happy with the vesion of Troop that i got. i was under the impresion that it was going to be Troop DX which u can cut from ( has flexi inbuilt) but it isn’t 🙁
working on it though.
-
That looks realy good 🙂
-
One of my customers is a Autoglym approved valeter, i’ll try and get some details off him on how to buy it in bulk
Give me a couple of days
-
I do have a limo it’s a angled view but of an old type. not sure if it will be any good. i’ll post it when i get into the workshop
-
Paul Goodwin
MemberMay 10, 2005 at 6:15 pm in reply to: can anyone advise me where i can buy a cadet please?Hi Guys just a quick update
getting my machine from Printmax, very good deal through the boards.
Not sure if i can indulge you but if Rob gives me the nod i will.
but it is a good deal imho 🙂
delivery monday fingersX
-
That is realy nice, and in such a short turn around as well 🙂
-
try cherwells 01280 840297
-
Paul Goodwin
MemberMay 1, 2005 at 12:28 pm in reply to: Looking for advice, tips on removing vinyl letteringI now use a steam wall paper striper as well. just be carefull on plastic panels.
On a smart car i used it on teh paint went a tad funny on the door panel on one side, may not have been the steam but it may have been, not sure the only thing i can think of is it’s a platic car.
apart from that it’s a very quick and clean way of striping vinyl.
-
That is realy Smart:)
how long did it take to apply to the unit? and what sort of “niggly” problems did you face Rob (?)
-
Paul Goodwin
MemberApril 28, 2005 at 10:24 am in reply to: can anyone help with design on van please?quote :dave_belfast wrote:
Hi ThereBelow i have attached a van
No you haven`t
Ohh yes he has :lol1:
-
Paul Goodwin
MemberApril 28, 2005 at 6:31 am in reply to: can anyone suggest improvements to this logo please?I’d go for the bottom right one, only because as it has been said red and food go together, the left one looks like a cold burger, but they are all cracking designs…
-
Thnaks Britchenko
i’ll do that
-
I thinki’ll be off to Vivid
what i see on my screen is nowhere close to what comes off my laser, let alone someone elses rig 🙂
-
Hi Vivid
CMYK i think
c 100
m 60
y 0
k 6is one of the colours, simple logo realy easy to recreate in cut vinyl but again teh designer has used pantone colours that have no close macth 🙁
-
Well it’s Past midnight why am i still here???
or was it midnight somewhere else where the world is ending? -
Paul Goodwin
MemberApril 26, 2005 at 10:30 am in reply to: Number plates/ Show plates and the policeThanks Paul 🙂
just waiting to see hwta they come back with now, i called the DVLA and they said it’s a grey area but the law doesn’t recognise the words showplates/fancy plates, and as soon as u put a registration on a plate it’s a number plate ect, but i argued that if the person signs a disclaimer that they are show plates not for road use ect, how can that be against the law to sell them ?
confusing.
-
Paul Goodwin
MemberApril 26, 2005 at 6:41 am in reply to: Number plates/ Show plates and the policeHi Guys thnx for replies
Dewi i’ll e-mail it now
-
Thanks Andrew your a star 🙂
-
I also believe Harley Davidson are very stringent with who uses their logo.
I’m sure there was a thread on here way back regarding this and that was just the use of the harley shield (which i believe is also copyrighted)
-
Hi Andrew
just to be a pain in teh A**e could you please do the word
Aylesbury for me as well. this will be the last time honest 🙂
if the customer wants anymore done, he will have to fork out for the font.
Thanks
Paul
-
:welcome: Lynn(not Peter)
-
Great Stuff Rod
you managed in the end to do some without me huh :lol1:
I’ll have to pop up soon and show u how it’s done 😉
-
Very Nice Job Nigel 😀
-
quote :How long is a piece of string.
From the center to the end X2 :lol1:
What does serious mean anyway (?)
-
I’d say yes Peter.
He sounds like he was taking the P**S
-
Yep true but they use red diesel :lol1:
ohh sorry the ones that lay red or black tarmacadom do 🙄
-
quote :Hi Paul, Don’t forget what i told you on Wed about your pic, time it was changed, you are actually younger than your photo makes you look.
(in my opinion)
nice to have met you mate.
L Jnice to have met you too LJ
new pic? don’t be daft, the pint gives me that mysterious anomisity look 🙂
quote :This post has frightened me to death. Just bought an american rv (motorhome to us europeans ) with a 7400cc Chevy engine bout 8 to the gallon if im lucky but hoping gas stays cheap cos its being converted to lpg.I though my 2.2 Legacy was bad at 19mpg around town but 8mpg 😕
-
Hi Shane
I filled up the van the other day with Esso Diesel. it was 89.9p per litre ( Aylesbury)
And the car was cheeper with unleaded petrol at 85.9 in buckingham
20 miles form aylesbury ri thought Diesel was Supposed to be CHEAPER? the government promoted Diesel as a cheap fuel, as soon as there are a lot of diesel vehicles on the road, hey presto it costs more.
So is the same going to happen to LPG?
cheap as chips now but in the future?
👿 -
:drink4: welcome
Rob He said SHEEP not SLEEP 😀
ohh a nother tip keep your hedges at waiste hight, once you sling your sheeps front legs on top they can’t run away ……………
-
Here u go try this just needs a bit more clean up
-
quote :it’s the funny squigly bit on the image below we need…
There goes 1000years of arabic up the drain lol.
havn’t got 1 sorry, but that looks easy enough to vector in, or get some one to type it in word ( on an arabic keyboard) and copy and paste into document.
-
Try these need cleaning up straight from my art cd’s
-
Paul Goodwin
MemberApril 7, 2005 at 1:13 pm in reply to: can anyone advise me where i can buy a cadet please?Cheers guys
I knwo who to talk to at the show next week now, if they are there……
-
Hi LJ
those are fine thanks… to much choice now 🙂
-
My Camm 1 did this a lot but not all the time, i found my marks where slightly out and the rollers were clogged up in some places making it slightly slip.
what i did was thoroughly clean the rollers ect. then i put down on each end 2 strips of tape, spent an age getting getting the material to run true, then mark with a fine pen on both ends where the material was on a true run.
Problem solved, i can now quite quickly load up and get accurate runs of about 3m without any slew.
Dunno if that will help you, but worth a try?
-
Thanks Peter 🙂
Simon you had me worried before i downloaded them, i thought whats so funny asking for taps? hehe
-
Great stuff, your a very talented person, wish i could do that 🙁
-
Hi Paul
Damn just missed this i was out, seen the customer and i managed to get him to go for something different, he’s happy though 🙂
thanks for your help and time though……
-
Thanks Andrew 😀
B*gger i wrote Serving
should have been Servicing 🙂
and if not beeing to cheeky the tel number ? 07875 661 776
Thanks Andrew your a star
-
Sorry Peter worded wrong
It’s the eye that is winking 🙂 but it has big horns that arn’t winking but the eye is
I’ll get my coat…………
Mort has left the building
-
quote Peter Normington:and you will be able to buy anything on show,
Peter does that mean i can buy some of the hot girlies on show 😉
Hubba Hubba 🙄
-
I use Impacts , find it very good
havn’t realy had any hand son with teh others so i can’t compare, but Impact does it for me.
-
thanks cheryl
-
ahh good point simon i’ll dig mine out now 🙂
-
Hi Bob
the last one i got from cherwells was called Overlay quite good but found it went off a bit to quick on small stuff 🙂
-
I’m driving up and going home same day, so it’s a no for me
( just thought i’d let u know 100%)
-
I normaly say
“have you got your pilots licence then?”
-
That is realy nice, it’s great to see a craftsman at work ,
and can i put myself down for 1 as well………………
in quite a few years too i may add 🙂
-
Thanks for the sunshine John 🙂
ohh and welcome back 😀
-
quote :Oh and don’t let anyone put you on the spot for prices …. just drum it into yourself to tell them to wait till you get back to the office and look at the costings and you will get back to them …. always the best way.
To damn right, i learnt that the hard way, looks more profesional as well.
Give them a Ish price if u have to but don’t ever put that in concrete.
Also type of vinyl u use make s a big differance as well
-
Going on what you have said i would say at least £220 ish
thats with 7 yr vinyl mind you….. ( pay more for that 🙂 )
-
Not ha dmine yet either 🙁
def going on the Weds so will meet you all there 😀
-
Whats a Transit?
:lol1: -
Thanks Steve 🙂
-
fill out the form Rob ……… and u will see your old school photo
it’s no link exchange or scam, and doesn’t cost anything
-
Hi Neil
unfortunatly vinyl
I cant paint to save my life 🙁
but i will do , i have an idea of what i want to do, but it’s knowing the names of the font’s i dont have much thats suitable in my database, if it exists even.
-
Well done guys, it looks well good.
-
quote :— PLEASE EXCUSE PEDRO FROM BEING ABSENT YESTERDAY. HE HAD (DIAHRE, DYREA, DIREATHE), THE SHITS. [WORDS IN ( )’s WERE CROSSED OUT].
:rofl:
-
Paul Goodwin
MemberMarch 8, 2005 at 1:08 pm in reply to: i have a problem with applying 751 help please?Dewi Snap-On do a hand held laser heat temp device
-
Paul Goodwin
MemberMarch 7, 2005 at 11:20 pm in reply to: does’nt time fly when your enjoying yourselfI first used it to play Command and Conquer , my phone bills back then were huge a coupel of hundred a month 🙁
but boy was it fun, that was around 10 yrs ago when my daughter was born.
Incidently then I have know McRod for nearly 10 years 🙂 as he was the first person i ever beat in C&C , and i never let him forget it (:) (:)
those were the days 😎
-
Thats what i’m not sure about Nigel
is this for a sign or is it a measuring straight edge? if it’s Measuring straight edge it would need to be 100%, so on a grinder it goes 🙂