Forum Replies Created
-
David Lowery
MemberAugust 4, 2019 at 12:46 pm in reply to: What are the rules to LED advertising vansquote Denise Goodfellow:Hi
I might not have worded the title correctly.We are looking at other revenue streams. ie mobile advertising van via LED screens.
I have seen quite a few on the road, but always they are parked up. Is there a rule that says you cannot display moving adverts (like a tv) while the said vehicle is moving on the road.
Must be static. Otherwise, other road users may be distracted and kill someone lol
-
Thanks all. It is glass reinforced. Got a sample this morning off Admiral tapes..sorted! :thumbsup:
-
Chris rules ok :thumbsup: :thumbsup: :thumbsup:
-
Just the job Chris :praiseyou: :praiseyou: :praiseyou: :thumbsup:
-
David Lowery
MemberFebruary 9, 2017 at 8:41 am in reply to: PPL (Standing up for Music Rights) raises it’s ugly head againI received many a letter of PRS and phone calls. I sent them a letter by recorded delivery saying if they persisted contacting me that I would sue them for corporate harassment. Didn’t hear from them again.
-
Cheers Neil
-
bump….:-)
-
Thanks Simon 😀
Got bored so ended up drawing what I needed in the end :lol1:
-
The difference is 3 :lol1:
-
David Lowery
MemberMarch 15, 2016 at 12:54 pm in reply to: Sign Manufacturer for tray and led 3d lettersI use Amalgamated Signs
Address: 13 Meadow St, Hyde SK14 1RE
Phone:0161 351 1171Gary is the owner and is a trade only supplier. Does great work.
-
quote John Harding:Yep I’m going – after all it’s the only holiday I get -probably up on wed back on Thursday so looking to catch up with friends old and new
where’s everyone staying ?????
john 😀
I’m booked in at the IBIS Birmingham Centre New Street for the Wednesday night.
-
David Lowery
MemberFebruary 24, 2016 at 2:28 pm in reply to: Credit & Debit Card Payment terminals – which one?worldpay zinc is our choice. you can take payment online or use a card reader for for pin and chip with your smartphone and you buy the equipment and have no monthly charges.
-
David Lowery
MemberFebruary 23, 2016 at 9:24 am in reply to: Buying My First Machine – Advice NeededI have always bought Gravograph. Expensive, yes, worth the cost? definitely.
-
David Lowery
MemberFebruary 23, 2016 at 9:20 am in reply to: How to install 3D metal letters without drilling?pack out with foamex leaving top of letters clear and fit vhb tape. Drill hole in top of the rear of the letters with a slot upwards then you can put a screw into the facsia, place the letter on and pull down slightly into the slot you made then stick the vhb tape. Belt and braces mate. 😀
-
Wednesday hopefully for me. Hope Robert turns up at Wetherspoons without a hangover this year :lol1:
-
Thanks Chris…that was the one, nearly! Apparently, they no longer use the head with the cigarette any more :thumbup2:
-
Cheers Chris….Happy New Year :thumbup2:
-
Sorry for delay in reply…been in Tenerife for Christmas 😉
Nope, customer hasnt got a clue.. :shake:
-
Bump 🙄
-
Where are you based in the country please?
-
will let him know…where are you based?
-
Is this still available? Got a guy who may be interested…..Price hoping for?
Regards
Dave -
David Lowery
MemberOctober 7, 2015 at 7:51 am in reply to: Font Identification Please – The AnchorageMany thanks Jamie
-
David Lowery
MemberJune 3, 2015 at 10:50 am in reply to: Cafe barrier system that hold foamex and perspex panels?Saw this company at Sign and Digital: http://www.amazingresultsonline.com
Dave
-
David Lowery
MemberFebruary 24, 2015 at 9:12 am in reply to: Who’s going to Sign & Digital UK? Where to stay?Just one George 🙄
-
David Lowery
MemberFebruary 23, 2015 at 12:27 pm in reply to: Who’s going to Sign & Digital UK? Where to stay?I will be going on the Wednesday this year. Gave last year a miss as the year before was very poor and did not see anyone off the boards at all 🙁
Thinking of booking a hotel so I dont have to travel back the same day. Prefer to get away from the area of the NEC to get cheaper prices.
Is there going to be a meet up in the bar area? -
David Lowery
MemberJune 17, 2014 at 11:48 am in reply to: Getting negative image in Roland VersaworksCheers George :lol1:
-
David Lowery
MemberJune 17, 2014 at 10:57 am in reply to: Getting negative image in Roland VersaworksSorted now thanks!
Twas a problem with Troop Designer ffs
-
undo the spring end first and tape with application tape so you dont drop the spring lol
-
Just a straight swap 🙂
-
Simples! Done mine twice now…go for it.
Take it slowly and it is very easy
-
Cheers Chris :thumbup2:
-
Many thanks Colin :2thumbs:
-
Many thanks Lorraine
xxx
-
Just got back from a very disapointing show. Was very busy but mainly because lots of people going round a much reduced show. Last one I will go to 🙁
-
Hi Marc from south Manc.
Here to help if we can 🙄 -
quote John Harding:any meeting places set up or nights out planned? im going one or two nights not sure just yet
Usually end up in the bar outside the hall entrance at lunchtime. I’m game for a meal out in the evening if anyone has plans for somewhere near?
-
I’m going 😀
Your round though George *drink* -
-
Ritrama do a range of Pantone matched vinyls and they do Pantone 180 C
-
Just park your vehicle in front of the shutter so the dipsticks can see that you will need to reverse out
-
Local supplier of powder coated A boards has 75mm posts if any use???
D.E.S. 01663 744 824
http://www.desaboardpavementsign.co.uk/
Dave
-
David Lowery
MemberFebruary 15, 2013 at 10:34 am in reply to: Convert CDR file to Illustrator pleaseSpot on Gary, many thanks
-
David Lowery
MemberJanuary 22, 2013 at 2:00 pm in reply to: Can you tell the difference between Arial and Helvetica?20/20! But worked as typsetter for NatWest for 20 years and Helvetica was their font then, though not now. 🙂
-
Thanks John, much appreciated 😀
-
David Lowery
MemberSeptember 6, 2012 at 12:07 pm in reply to: Looking foar a supplier like Ashby but not Ashby!asd metal services
-
Victory Design have a great range of colours and effects
-
only text available so no caps
-
american uncial (as a omega font)
If you need anything setting up, let me know.
-
David Lowery
MemberMay 14, 2012 at 6:20 pm in reply to: Font suggestion for french style patisserieTake it you will be using French letters then 🙄
-
half a dozen for you – if no good, got loads more 🙄
-
Spot on Noel, Thanks very much :thumbsup:
Dave
-
Cheers Thomas – that’s me now sorted 😀
-
David Lowery
MemberDecember 7, 2011 at 8:59 am in reply to: The VIDEO Link Thread… Have you seen this one?Why 😕
-
David Lowery
MemberDecember 6, 2011 at 11:25 am in reply to: The VIDEO Link Thread… Have you seen this one?http://www.youtube.com/watch_popup?v=bk … A&vq=large
-
David Lowery
MemberDecember 6, 2011 at 11:23 am in reply to: The VIDEO Link Thread… Have you seen this one?http://www.youtube.com/watch_popup?v=hh … edium#t=20
-
David Lowery
MemberNovember 28, 2011 at 11:39 am in reply to: plaques supplier (recommended) please?No Hugh, never been asked for anything like that 🙁
-
David Lowery
MemberNovember 28, 2011 at 8:33 am in reply to: plaques supplier (recommended) please?http://www.rowandisplays.com/?gclid=CIK … 3godUSlrqg
Just searched for heraldry plaques 🙂
-
quote Brian Hays:Amen to that Phill. Shame not everyone will agree with you. It’s getting harder to make a living each year as it is. Shame some folk think buying a disk gives them the right to share with anybody they feel like. In the medium to long term it will either put the prices up, or people like ourselves out of business.
even those on the boards are part of the problem
https://www.uksignboards.com/viewforum.php?f=18 -
David Lowery
MemberNovember 5, 2011 at 4:52 pm in reply to: Does anyone have these vehicle outlines?https://www.uksignboards.com/viewtopic.p … 887#412887
-
David Lowery
MemberNovember 4, 2011 at 9:24 am in reply to: What is the best way to construct a 5m x 2m sign.Flex face would do the job
-
David Lowery
MemberNovember 2, 2011 at 8:15 am in reply to: what colours early police vehicles usedMany thanks for all your replies – still :banghead: with police 😀
-
David Lowery
MemberOctober 25, 2011 at 5:56 pm in reply to: what colours early police vehicles usedi thought i hadn’t but customer chasing so put on boards again 😕
sincere apologies 🙁
i’ll go and climb back in my hole 🙄
-
got all the clubs in the world for some obscure reason 😕
-
David Lowery
MemberOctober 18, 2011 at 7:34 am in reply to: Advice needed on the best way to Transport our Printer?It locks the printheads in place to stop them sliding about when you drop the machine :lol1:
-
Hi Stu, Get blank banner from Trounce Ltd without eyelets and hemming. Print! send back to Trounce and they will hem and eyelet for you.
Telephone 0161 740 2159 http://www.trounce.co.uk
Dave -
did one a few years ago George but don’t know if I still have it on my works comps. Will have a looksy on Monday for you.
Dave
-
David Lowery
MemberOctober 7, 2011 at 10:40 am in reply to: Ford Sierra Sapphire Cosworth 4×4 (1991)Have a looksy here:
-
Georgia Regular and slightly stretched
-
Try Floreeda for your acrylic. Ask for Silicon Acrylic as this, when flame polished leaves the edges looking like glass!
-
He was onto a loser as soon as I noticed he had missed the apostrophe out of Dragon’s Court :lol1:
-
David Lowery
MemberJune 8, 2011 at 5:34 pm in reply to: Need some help pricing 10 magnetic signs pleaseAny small offcuts should be used up by printing your own advert.
I print them saying that ‘you are not using the largest advertising space you have’ or words to that effect and then if I am at B&Q or Wickes or similar and I see a unsigned van, on the magnetic goes! Simples! -
11 C on the sign toolbar?
-
Always said Dave was dotty :lol1:
-
Tennants from the link in the signtoolbar no.1
http://www.tennantsuk.com/chevron-kit/chevron-kit.php
Apply the next day!
Dave
-
What about two composite sign trays with one being 6mm smaller that the other so they fit together. This way you could have a box 25mm thick.
Dave
-
quote Frank Horner:Couldn’t believe it when I got a call from my sister, she won the Valuejet in the Spandex draw. Don’t know if she got the outline disc though.
Well done her!!! now let me think….outline disc worth £100 or Valuejet worth £11,000…no contest, stuff the disc :lol1:
-
David Lowery
MemberApril 15, 2011 at 11:09 am in reply to: Hey guys,.. anyone know where to get Parasols?For brollies:
http://www.maneumbrellas.co.uk/pages/ga … rasol.aspx
-
here you go
-
Wetherspoons were 4 queues – 20 deep so ended up with George in the bar in the exhibition hall.
Next time, lets have the exhibition hall near wetherspoons and cancel any other exhibition on that day :lol1: -
Any use Hugh? 4 to choose from 😕
-
Trounce Ltd the second one 🙂
-
quote George Elsmore:decided to go today as well and take in the cv show…and tomorrow too 😀
That means the bar will be dry for Wednesday 🙄
-
Here are 3 globes Harry. A search of my clipart gives 937 globes so if you could be more specific as to what you are after, i will have another look, if these are no good.
-
quote Jill Marie Welsh:caramel diarrhea brown
As usual Jill, you have a wonderful way with words :lol1:
-
so fill it out, sign it and stick it under their noses…remember that bullpoo baffles brains 😀
-
-
Cheers Jamie :thumbup2:
-
:lol1:
No probs George
-
Transport Medium????
Nope, forget that!! Was wrong 🙁
-
quote Robert Lambie:quote Gavin Conway:Dave R … you obviously don’t use your disk… any chance of passing it on.. 😀
Register for the show mate, they will send you one free. 😉
Got to be picked up from the stand at the show Rob 😕
-
I checked the small print Warren and it is just for visiting their stand plus you get a chance to win a Mutoh Wide Format Printer worth £11,000
😀 -
No Harry, twas sent to me on the 30th March
-
Spot on Peter, Thanks very much 😀