Forum Replies Created
-
Have a look at the Mimaki ucjv
No heat required
Option for white ink
Print and cutStef
-
Stefan Byrne
MemberApril 28, 2020 at 5:54 pm in reply to: 3M Dichroic Window Film. supplier recommendation please.Try William Smith, Stef.
https://www.williamsmith.co.uk -
Stefan Byrne
MemberApril 8, 2020 at 5:33 pm in reply to: Urgent – clear face visor film required to assist in the current crisisPhil
I will send the sample out tomorrow, if the film is suitable you can have it Foc
Stef
-
Stefan Byrne
MemberApril 8, 2020 at 4:47 pm in reply to: Urgent – clear face visor film required to assist in the current crisisHi Phil
The film is optically clear and scratch resistant however the backing liner is not
Stef
-
Stefan Byrne
MemberApril 8, 2020 at 4:30 pm in reply to: Urgent – clear face visor film required to assist in the current crisisPhil
In the West Midlands
Forward you’re address and I will post tomorrowStef
-
Stefan Byrne
MemberApril 8, 2020 at 4:23 pm in reply to: Urgent – clear face visor film required to assist in the current crisisHi Phil
In the daily star there is an article about a husband and wife making masks similar to yours using window filmShall I post a sample
Stef
-
Stefan Byrne
MemberApril 8, 2020 at 3:43 pm in reply to: Urgent – clear face visor film required to assist in the current crisisHi Phil
Could you use 175 micron security film if so I have a full roll 1200mm x 30lmStef
-
Stefan Byrne
MemberSeptember 25, 2019 at 11:21 am in reply to: Copper and Bronze Vinyl. Supplier recommendations please?Hi David
Avery 800 premium cast do a Bronze
oracle 651 do a copperstefan :thumbsup:
-
Stefan Byrne
MemberSeptember 22, 2019 at 10:47 am in reply to: Quick POLL : Which Digital Printer do you have? -
Hi Rob
That’s the issue I’ve got, I create the effect using the linear gradient tool and send to raster link then I’ve tried to allocate the white however it wont allow me to select it:shake:
-
Stefan Byrne
MemberJune 29, 2018 at 6:40 pm in reply to: Mimaki UCJV300-160 installed, opinions so far!Hi lee
Having ours installed on Monday, really impressed with sample prints especially the white onto optically clear films
Stef -
Stefan Byrne
MemberApril 25, 2018 at 9:08 am in reply to: 3m scotchlite 780c reflective – who sells it?Hi Hugh
Try spandex -
:shake: :shake: the :shake: I’ve looked at these, had proofs test prints etc looking to purchase one, ideal for my requirements ie partition glazing applications.dont like the sound of a 4 month delivery.
-
Hi peter
Solar gard are now Saint Gobain.
To purchase 10 lm may work out expensive as they distribute from Begium,what about using a good quality equivelant? -
Hi Denise
We do a lot of partition glazing, our normal practice is to apply film on side you want it read from ie facefixed issue aftercare statement stating no solvents when cleaning
Stef -
Metamark :awkward:
-
Thanks David
Just ordered 1 yellow and 1 black and 2 white for delivery tomorrow just in case
Wallpaper ordered from metalmark
Stef -
Breaking up on Friday, however just received an order for 75m2 of printed
Wallpaper direct onto plasterboard needs to be fitted before students return to uni.
Using pre pasted option rather than reposionable due to size of wall approx8500x 8000
Any input would be appreciatedStef
-
Stefan Byrne
MemberNovember 3, 2016 at 1:33 pm in reply to: Help colour matching an Avery vinyl with Image PerfectHi Daniel
Just compared the 2 swatches looks identical image perfect Forest Green Gloss 5765stefan
-
we always use baby shampoo, have done for the last 15 years. rapid tac adheres to quickly especially on large glass panels
hexis recommend easypose application fluid.stef
-
-
Hi Richard
We recently installed full coverage on glass partitions wet applied mixed with a detergent. When installing please consider the following
1 easily scratches
2 goes slightly milk however disappears in about an hour
3 use a window film hard blue squeegee
Also hexis website shows both wet and dry application methodsRegards
Stefan