[t-winks]

you could also try northern signcases

Northern Signcases
Unit 9D
Kayley Ind.Est.
Richmond Street
Ashton -Under – Lyne
Lancs
OL7 0AU
Bus: +44 (0161) 3436600
Bus Fax: +44 (0161) 3436611

[t-winks]

We have 2 hard drives on every computer all files are baked up weekly from c drive to d and once every couple of months we back up onto cd

[t-winks]

Try these also known as apco, might be better if you sourced your own powder coaters, theirs take a bit to long

LKH Estate
Tickhill Road
Balby
Doncaster
DN4 8QG
+44 (01302) 855907

[t-winks]

We have done quite a few of these and there is no set way of doing them, weve used glass with vinyls on the reverse, frosted glass with vinyl on the front, cast acrylic flame polised edges vinyls on reverse cut acrylic or brass letters mounted on the front.
Reverse engraved with vinyl on the front, the list just goes on and on it depends more on the design or effect you tfying to get

[t-winks]

our brass, s/s and ali are sorted and sold to scrap mechants, the acrylics are more of a problem, larger pieces left over from routing we find the local schools will come and collect.
fomex being the main problem no one wants it so that goes in the bin.
The council have just started a scheme for households to recycle paper of which we borrowed a bin which we take to the nearest house every week (dont tell the council)

[t-winks]

thanks for the advice the problem was more to do with the room available for the lighting. It was going to have to be mounted between a double elipse, changed the design slightly, now have the room to look at fluorescent.

Tony

[t-winks]

Hi if your looking at promo work, you might want to think about sublimation printing, try a company called mega, start up kits from around £750

Tony

[t-winks]

Hi weve done this sort of thing in corian before, but it is pricey, also made moulds in reverse and had them cast in concrete, if these ideas appeal, get back to me and we could work something out.

Tony

[t-winks]

brass sheets are bought at suregrave, but you can get the same deal at enravamet, we do get a good discount. The names Tony

[t-winks]

we have an enquiry for a 2 totems and they are asking about led illumination run with solar panels, is this possible and if so do you know where we can get information for this

[t-winks]

Hi.
brass engraving feed rates 500mm a min. at 18000 rpm
depth of cut .2 to .25mm clamp securely or use self adhesive to stick it down with. can paint fill with cellulose or stove enamal, surgrave sell little pots of paint as well as the brass, brass costs £42.00 plus vat for a 4×2 sheet. price out for a standard type A4 opening plaque is £80.00 plus vat

[t-winks]

We supply cut letters logo’s with fixings and templates in all amterials except s/s.
Tell us the letter hight and material and we get straight back with a price.

Tony

[t-winks]

HI THERE

I REMEMBER SEEING A PRODUCT CALLED ROTAVISION OR ROLLERVISION, DONT REMEMBER WHO MADE IT THOUGH. LARGE ILLUMINATED ROTATING POSTER DISPLAY CASE, FREE STANDING. I’LL SEE IF I CAN FIND MORE DETAILS ON IT.

TONY

[t-winks]

we use plexus MA300 works a treat and has a reasonably quick setting time, about 10 mins.

[t-winks]

we used to cut quite alot at one time using a guillotine, gave quite a clean cut.