Wayne Maxwell
Forum Replies Created
-
Guys thanks for taking time to reply. Finally got to the source of my problem. A faulty media sensor. Good thing is the printer can run without it.. thank god..
If anyone comes across this problem give me a message and hopefully I can guide you in the right direction.
Thanks again for the replies. Much appreciated.
Wayne
-
Wayne Maxwell
MemberJanuary 1, 2022 at 10:39 pm in reply to: Printing Door Mats, sublimation heat settings help needed?Thanks Robert.. yes I think next step is to ramp up the heat as I can’t make the speed go any slower. I buy these on a smaller scale for jobs so definitely the correct media, I usually press these on a small clam style press but the size of 60cm x 40cm is just to big for the small press 👍
-
Wayne Maxwell
MemberDecember 18, 2021 at 8:35 pm in reply to: Sign Posts, Clips and rails. Who do you buy from?Signgeer is quite good 👍
-
Wayne Maxwell
MemberDecember 18, 2021 at 8:27 pm in reply to: Banner eyelet machine. Views and opinions on this one please?I got one from Hanolex UK. A great wee bit of kit and very robust!
https://www.eyelets.co.uk -
Wayne Maxwell
MemberAugust 5, 2020 at 5:57 pm in reply to: Laser engraving sheets, help sourcing a supplier please?Thanks for the help all much appreciated.
Managed to order supplies from Trotec / Hpc and Grafityp
-
Wayne Maxwell
MemberJuly 19, 2020 at 3:59 pm in reply to: Order placed for my new 1600 x 900mm Laser CutterThanks for the advice guys. Just have the machine a short time so I’ll have to do get the manual out and try to fix. In the meantime will this cause any problems if I continue to cut any materials?
-
Wayne Maxwell
MemberJuly 19, 2020 at 9:22 am in reply to: Recommendation for Banner eyelet tool & die, please?I bought one from Hanolex. 11mm sees to be the norm for eyelets size. Hanolex press is great build quality and easy on the arms if pressing a lot. 👍
-
Wayne Maxwell
MemberJuly 16, 2020 at 10:49 pm in reply to: Recommendations for Cut Lettering for Shop SignWhat material are you wanting?
Acrylic, dibond etc
-
Wayne Maxwell
MemberJuly 16, 2020 at 10:46 pm in reply to: Order placed for my new 1600 x 900mm Laser Cutter -
Wayne Maxwell
MemberMarch 5, 2022 at 4:01 pm in reply to: Printing Door Mats, sublimation heat settings help needed?Robert to cut a ling story short we just bought a classic press big enough to press the floor mats.
Works a treat. Thanks for taking time to reply.
-
Wayne Maxwell
MemberOctober 20, 2021 at 9:11 pm in reply to: Stepping into Sublimation Printing, advice needed please?Hi Graham.
1st flag produced today.
Your temp photo of 200 degrees was spot on and I’ve mastered the speed settings 😁
Onwards and upwards they say 🚀
PS I’d like to ask if you could send me over a Berger product brochures for all things textile.
Cheers
-
Wayne Maxwell
MemberOctober 17, 2021 at 9:07 am in reply to: Stepping into Sublimation Printing, advice needed please?Thanks for taking the time to reply Graham. I’m really confused about the speed settings…
Can you send me the link to that video you found may I can pick up some tips from it.
Adkins arent very helpful and their website isn’t great either 😕 -
Wayne Maxwell
MemberOctober 17, 2021 at 2:26 pm in reply to: Stepping into Sublimation Printing, advice needed please?Good to know Graham. I’ll give your website a check. I work for myself now doing signage and print large format an always looking new suppliers for products etc.
-
Wayne Maxwell
MemberOctober 17, 2021 at 9:47 am in reply to: Stepping into Sublimation Printing, advice needed please?Thanks Graham. Can I ask if you do any large sublimation yourself or what’s your game?
-
Wayne Maxwell
MemberOctober 17, 2021 at 9:03 am in reply to: Stepping into Sublimation Printing, advice needed please?Hi Karen. You can buy direct to textile or dye sublimation which prints onto paper then has to b pressed through the calendar press. I went for a small calendar press as the biggest size of flag I’m going to produce would be 5ft x 3ft plus I’m tight for space in my unit 🙂
-
Wayne Maxwell
MemberMay 5, 2021 at 9:54 pm in reply to: Epson SC-F500 Dye Sublimation Prints, advice please?Thanks for your advice Karen. I’ve just come across a product called Subli Flex No Cut. I’m gona order some samples and give it a blast. Still at the learning stages of adjust times and temps to get the correct print result 🙂
-
Wayne Maxwell
MemberSeptember 10, 2020 at 5:16 pm in reply to: Neon LED Signs and Graphics : REVs Spin Class GymNice Robert. I also use this neon Flex material.
Do you mind if ask. Do you router chanel out of your acrylic or foamex backing board below you lay in the neon Flex?
-
Wayne Maxwell
MemberJuly 19, 2020 at 9:30 am in reply to: Order placed for my new 1600 x 900mm Laser Cutter -
Wayne Maxwell
MemberJuly 17, 2020 at 2:26 pm in reply to: Recommendations for Cut Lettering for Shop SignI’m in Northern Ireland but if I see artwork I can price up for you. I’m awaiting delivery of materials any day now. Need to know how thick and what dimensions etc.
-
Wayne Maxwell
MemberJuly 17, 2020 at 9:04 am in reply to: Order placed for my new 1600 x 900mm Laser CutterYes Cherwell. Think I’ll stock up on it now 👍