Forum Replies Created
-
Sarandaz
MemberDecember 12, 2006 at 10:40 pm in reply to: suppliers needed please for t shirts and sweatshirts?(mod-edit) no advertising please read board rules
-
Sarandaz
MemberNovember 13, 2006 at 11:25 pm in reply to: what are peoples views on the robo cutter please?Hi Shane.Before buying roland gx24 plotter.i used to do all tee shirts jobs with craft robo.To be honest i liked it very easy to use go to this link and owner of the site named Steve very helpfull guy and expert in craftrobo cutters.
http://www.moltengold.com/cgi-bin/eBzge … ftrobo.htmhope it will help.
sarandaz
-
Ok, Thanks Rob.
how much would labels like this sell for?
sarandaz
mod-edit
-
Thanks andrew, information helped alot.
sarandaz
-
Any idea where shall i look for these fonts?
thanks
Sarandaz -
Hi guys, i think you have embroidery business, please have a look of this site.
http://www.embroideryforum.co.uk
please register with this site and help me to make this site helpfull for all embroidery business.
Once you register you will be upgraded to gold supplier, free for 1 year.thanks
sarandaz -
Hi Joe have look on this site.
http://www.sales-agents.com/
I didnt use personaly any freelance agent but one of my friend did, And smething he told me that he is useing two sales agents on commission but before hiring he dose make sure that they are old enough to start their own business, and they only work in feild.once they got an order and then you should be the contact person for that customer.Your sles agent shouldnot allowed to make further deals.serandaz
-
Hi george send me your postal address i will send you xxxl kelly green shirts.
(mod-edit)
serandaz
-
Hi Guys i just seen an embroidery talk.My name is Sarandaz and been in embroidery business from 2 years i have got toyota esp9000 machines.For digitising best ever software created is called WilcomES65 cost (£12000) do not use fake or copies )
We are digitising in house and digitising for other companies as well.never had any complaint.
If you need any help in digitising or embroidery please send me an email or pm.Sarandaz
-
Never been a big fan of ebay but was looking for bargains,4 weeks ago bought a computer from ebay £250.sellers rating was 3000 and 97% positive.Item still not arrived no contacts send many mails no replies and today i been told sellers is no loger registered.Company name was (mod-edit)
(:) ebay. I would never recomend to buy something from ebay for more than 10er. -
Cheers mike names problem is sorted. only numbers left. thanks for everyone guys
cheers
sarandaz -
could’nt find anywhere.
sarandaz
-
please copy and paste this link in your browser.Meath council logo is in it aswell. cheers.
http://images.google.co.uk/imgres?imgur … D%26sa%3DG
-
Great work Alan,
-
Cheers mate i seen all semi serif and rotis but cant find exact match.any other idea or i have to digitized it.its for very fusy customer
regards
sarandaz -
welcome paul,its No1 forum for alot of expert advise.
-
Thanks Kawy, there is slight diffrence in (r) but this is 99% match.Customer approved it anyway, thank you very much
sarandaz
-
There are not many ppl in this forum doing embroidery,or because we do not have embroidery option anywhere in this board.what do you think if admin make some space for embroidery aswell like they got for screenprinting.it could be Embroidery&Screenprinting forum, It could be helpfull,Can you consider this option Rob?
cheers
sarandaz -
Hello Mike, Welcome to uksign boards an easy way to learn alot about sign industry.
-
-
ANOTHER TRY
-
WILL THIS WORK
-
Sorry i forgot to mention i have china made bit cheap heatpress, thats why i need to press for 30 second, but with good branded heat press 20 secs will be enough.
-
Hi Nik
Here i tell you full process what i do for tee shirt printing.
1- turn you het press on and set its temp to 180 degree and time to 30 seconds2- put shirt under the press
3- press for 5 sec and take off the pressure plate.
4- put your print material on shirt make sure its in middle and both sides left right have equal distance
5- press again for 30 second
6-open or take the pressure off
7- wait for 10-15 sec
8-peel offbacking
shirt is ready
hope it will help -
Welcome John, Nice to have you here and good luck with your business.How much your Printer/cutter cost you,Actualy i am thinking to buy one, i am new in this feild aswell and because i got this board full of help and information so i know i can do this.
sarandaz -
Usualy Xpres sent their application instruction sheet with every order.With easy cut they recomen 10 sectime and 160 degree heat. and 180 degree for workwear clothing.
But this recomendation is for their own make heat press, I have got china make cheap heat press and i 98 % of time i use 180 degree and between 20 – 30 secI do alot of teeshirt and workwear hi viz clothing and i use SUPER FLEX from xpress its 5.25/mtr 50mm roll so worked out quite cheap and its good never had any problem or complaint
-
Hi Nik, Its happened to my heatpress once.If you look underneath your heatpress you should see one or two nuts or screws.they might be loose, just tight them problem should be resolve. i did same with my heatpress and its working perfect now.
hope this will help -
Thanks Peter,Glen,John &Dawn for your advises.I put this sign outside.It looks lovely except its not in line. Is there any rules for measurement and allignment of sign.
And i dont know how long do i need to rub with squeeges.
when i took the app tape off one or corners were,nt stick with window.and i can see little pubbles aswell, hardly noticable but i would say it was quality work.
What about Xpres Versacam1 for cutting they want 1300 quids for that. or is there any other cutter you suggest with nice user friendly software package. -
Its simple design good colour combination and looks good to eyes.
-
Hey Guys i just done my UKSG membership and i done successfully my first two words on window….i am so excited my first sign is on our shop window. FOOTBALL RUGBY KITS MADE TO ORDER.
i will definetly going for bigger cutter and more into sign industry. -
Cheers Peter i am going for full membership now
thanks
-
Thanks God, Is it that normal, i thought its only me who make these kind of spelling mistakes, Specialy when i am doing embroidery or print in welsh.Its so easy to make spelling mistakes in welsh words.
-
Hi thanks Andy i have idea now.i hope i would quote best price.
thanks -
Hi Sean, That is good price.Though i dont know much about banners but i am thinking now (mod-edit)
thanks sarandaz -
Hi Mike
i have two single heads Toyota ESP9000. 15 colour change
certificate is 9 colours and invitation is 6 colours.
certificate took good 45 min from framing to fininshing.
and invitation took 35min
thanks or reply mike. -
Hello Jake welcome to this community mate.Its realy fun and very experinced advised available for your business.i been here only from few days and i am adicted to this forum.Good luck to your business and you mention that you want to develop your own brand.Let me know when you ready i think i have got plenty of information about branding, This is something i done myself.
I am doing embroidery and heat press printing at the moment.and want to move on for bigger market of printing on vans,cars etc….
take care -
Hi Sean welcome to this community.
-
Thanks Shane and John i will go for gold membership soon.
-
Thanks guys.Its realy good to be here in this community.Thanks for ur warm welcomes.Could u please advise I am thinking to join as bronze-silver or gold member.Do u think its realy worth doing that.I mean other than chat will it be helpfull for my business?
-
Excellent Job Neil,Looks great
-
THanks Rob for changing my name. JUst want to ask some thing Rob this is a business cummunity cant we exchange our services here. (mod-edit)
sarandaz
-
Thanks Jayne.Its nice to see another Welsh Flag here.
-
Hi John its realy annoying ,i lost mine once in parking and whoever found my keys pass it to parking security office and i asked them by chance and they gave it to me.Did you asked them ?
-
Thanks guys i realy enjoying to be in same business community.Phill cardiff is beautifull town mate. if you are near to our shop pop in for lunch i buy you lush pakistani food.i dont know if i am allowed to mention my business name but you can ring me on my mobile07740619446.
And need some help guys i bought some sign vinyl from Xpres, But dont know nothing about sign printing.I am using CraftRobo for cutting.and then how to apply this on cars or vans and Can i apply this to windows aswell?
And what if some one want their logo ? Do i need a bigger cutter and any other machine for multi colour logo cutting and printing? -
ok thanks i just sent rob an email
-
Wow thank you very much for your replys and warm welcome.i will try my best to be active in this board. cheers guys. oh one thing anyone knows how i can edit my business name as my user name and put my name as my user name.