Forum Replies Created
-
I think it’s called Ontime in SignLab which I believe is also known
as OndimeHope this helps
Chris
Beaten to it by George !!
-
Thanks for your replies
I agree that it is only good practice & polite to ask
Chris
-
Thanks Dave
If it was a job where all the design & layout were done by the customer
or someone on their behalf I guess it might be prudent to run it past
them before using it.Chris
-
Hi Peter
I have not used these but they do double sided grp hanging signs in a couple of standard sizes
http://www.signmasterdirect.co.uk
Chris
-
David
I’ve used http://www.moranswoodcomponents.co.uk a couple of times.
They do a wide range of blanks
Chris
-
Hi Derek
I did wonder if it was more than the logo that was required
Thanks for the other link – very useful
Chris
-
Derek
If you just need the logo it’s on Brands of the World
Chris
-
Dale
Thanks very much for your help
Chris
-
Hi Pat
Try this site http://www.graphicservices.uk.com
I saw an ad for them in Sign up Date magazine. Never used them though
Chris
-
Thanks for looking George
Chris
-
Thanks a lot George
I’ll have a search for it
Chris
-
Phill
Hexis do both Dry Wipe film and Blackboard Vinyl and will send you a sample if you need one
Chris
-
-
Hi Lorraine
We were in Cala’n Bosch a couple of weeks ago. Nice relaxing break. We were in the Casa del Lago overlooking the marina.
Lots of places to eat & drink as I expect you’ve found. We liked the Cafe Balear, more expensive than some but very nice. A lot of locals seemed to eat there which is probably a good sign.
If you go to Mahon harbour check out the huge expensive motor yachts with their names in Brush Script !
Enjoy the rest of your break
Chris
-
Chris Sharps
MemberSeptember 13, 2006 at 1:15 pm in reply to: Magnet grippers for fitting vehicle graphics?I got them from http://www.vkf-renzel.co.uk
Chris
Just looked on the site and can’t see them !
They are in their catalogue though
-
Well spotted Marcella
Although on closer inspection I think it’s Trebuchet rather than bold
Thanks for the ID
Chris
-
Thanks for all your comments
The customer is a designer so I can’t claim any credit for the design ! My input was suggesting materials & producing the end product
Joe – I don’t know the name of the font, the artwork was supplied purely as vectors. I have left a message to see if I can find out and will let you know
Yes I’m not too far from Bristol. I’ll have to pop in and say hello when you get your new shop up & running
Chris
-
Chris Sharps
MemberAugust 28, 2006 at 2:44 pm in reply to: Help! Accent Signs – lettering pricelist.You’re welcome. Glad it wasn’t too far out
Chris
-
Chris Sharps
MemberAugust 28, 2006 at 1:37 pm in reply to: Help! Accent Signs – lettering pricelist.Dave
I have a 2005 list (May be too old) with prices as follows
305mm moulded £10.64 each. No loading for gold and template & locators inc.
305mm flat cut 5mm £5.20 each for block & £7.40 each for serif
plus 10% for gold & 10% for template & locatorsDelivery £15.00.
Plus VAT
Hope this helps and is not too out of date
Chris
-
Hi Brian
I don’t have it on my safety CD but found something like it in an old catalogue
Look at http://www.safetyshop.com under Safety Signs then Detachable Scaffolding Signs. I think this is what you are after
You will probably be able to create one with this as a guide
Chris
-
That’s the one!
Thanks a lot Marcella
Chris
-
-
-
Hi George
You could try http://www.greenham.com
I’ve not used them but they do this type of thing and have several branches
Chris
-
The Office of the Deputy Prime Minister have produced a booklet called “Outdoor Advertisements and Signs” which may be the one Jayne mentioned.
It can also be viewed on http://www.planning.odpm.gov.uk/advice.htm
Class 5 deals with business premises and as Jayne also mentioned Height is a factor
Chris
-
I’ve just recently started getting all the types mentioned.
Never got them before
Chris
-
Chris Sharps
MemberFebruary 14, 2006 at 12:55 pm in reply to: 3d box effect projecting sign supplier?Kings Plastics do non illuminated projecting signs
Not used them myself but might be worth a look – http://www.kingsplastics.co.uk
Chris
-
Chris Sharps
MemberJanuary 9, 2006 at 1:51 pm in reply to: Menu Board Vinyl suitable for liquid pens?Hi Chris
Hexis 01543 411221 do a clear dry wipe vinyl which could be put over a
black layer if you can’t find a suitable black dry wipe. They also do a blackboard type material.Chris
-
Chris Sharps
MemberAugust 22, 2005 at 1:19 pm in reply to: Still looking for an early black cab outlineKev
Not sure if these are old enough.
Chris
PS Sorry but can’t add files after all
-
-
Cherwell sign supplies advertise cut to size frames from a variety of extrusions including Eurotrim 100. I don’t know if they sell lengths unmade up.
Tel 01280 840297
Chris
-
Chris Sharps
MemberApril 28, 2005 at 12:44 pm in reply to: Carbon fiber effect suppliers and articlecode?Doro Tape do one called Doro 7100
Not tried it so don’t know what it’s like
Chris
-
Hi Cat
Try D.E.S. Ltd they do a range up to 40in x 60in
I have not used them so can’t comment on what they are like
Tel 01663 744824 or http://www.desltd.co.uk
Chris[/url]
-
-
Hi Nobby
1) In Signlab it’s called Handled also known as Handel in other formats
2) Attached as an ai file
Cheers
Chris
-
Thanks Adrian
Another happy downloader
Chris
-
Hi Frank
Cherwell Sign Supplies do suckers – not sure about the wire?
Tel 01280 840297
Chris
-
Hi Dave
Jag Sign Supplies have them in their catalogue
Tel 01409 254370
Chris
-
Thanks Tim
I’ll give those other avenues a try
Chris
-
Thanks for your suggestions I’ll give them a try
Chris
-
Hi all
Thanks for your welcome messages
In reply to Lee – I’m in the Shepton Mallet area
Cheers
Chris