Forum Replies Created
-
alex reid
MemberAugust 29, 2009 at 11:13 am in reply to: why is installing PCUT CTN630 & Artcut 2005 a problem?should have read the date on that post .sorry hope its useful for anyone wi the same problem.
-
alex reid
MemberAugust 29, 2009 at 11:05 am in reply to: why is installing PCUT CTN630 & Artcut 2005 a problem?If you go online type in pcut laserpoint parts & supplies you can get any part from them from a pinch roller to a main board quite cheap its based in america though.
-
alex reid
MemberAugust 29, 2009 at 10:47 am in reply to: why is installing PCUT CTN630 & Artcut 2005 a problem?About your p cut failing to cut it could be that your cutter needs moved away from the buffer which stops it working when you go to far to the side
you will find one either side of the cutter when the box holding the cutter hits this it disables the cutter. Manually move the cutting box away from the buffer and it should work okay. As you seem to have done all the checks with your pc b,baud rate etc seems ok .So it must be something simple like above as I had the same problem with my pcut . -
THANKS for bringing my attention to the fact that there are dates above the messages I thought that they were new posts didn’t notice the dates. sorry .
regards Alex
-
alex reid
MemberDecember 9, 2006 at 7:24 pm in reply to: ideas please for a shadow not too bright with van design?🙁 Sorry mate VAN looks good .I,M A BRUSH SIGN PAINTER JUST STARTED WITH THE VINYL AND NEW TO SIGN UK I THOUGHT IT WAS A NEW MESSAGE.
One thing I have learnt in sign working you could be the best sign writer of lettering but layout colour and choice of styles of alphabets could make your hard work look bad.Your finished result looks good.regards Alex
-
alex reid
MemberDecember 9, 2006 at 1:36 pm in reply to: ideas please for a shadow not too bright with van design?change the black text to white with a grey shadow slightly darker than the silver van should make the lettering cearer.
-
Can you place the JJP DOORS Ltd at the top of the van,external grp & steel doors below that in 1 line,and the tel number below that .
Enlarge the photo of the door over a larger area of the van and fade the photo like a sort of water mark effect so you can make out what it is but allows legibility of the lettering. -
Jill is the kerning of a word the leading ,spacing, when I was taught spacing of text it was called leading from the method used by printers who used lead spacers to seperate text .
-
Nice sign, you’ve made an old style alphabet look modern.