Nick Harper
Forum Replies Created
-
Many thanks for all the help. Bauhaus is close enough for me.
Nick
-
Problem Solved. It is Baskerville, but not exactly the same as Signlab’s version. 😳
-
-
Many thanks all for your suggestions.
I think the blacksmith/metal fabricator route is the way to go.
Many thanks
Nick -
Many thanks Fred. Sorry if I dropped you in it.
Seems i’ve opened a can of worms here.
I’m sure i have seen many other requests for outlines on this forum, but
I apologise if i’ve broken any rules, (written or un-written). 🙁 -
Sorry George, have never pm’d anyone before. How do i go about it please.
Nick
-
That would be great George, how do i get your email address?
Nick
-
Thanks a million Glen for the font and file.
Nick, – you are the font ID king, many thanks.
Saved again by the boards!
Nick.
-
Same thing again Jamie, same as when you gave me the NatWest fonts.
The light version of Radient will be fine, i don’t want to put you to any more trouble.
Much appreciation for all your efforts.
Nick
-
Hi Jamie. I’ve just downloaded the medium version you posted, and when i open it, it comes up as Radient Light again. Very Wierd stuff 🙁
-
Jamie, if you see this message, i wonder if you can give me some advice.
When i download the two fonts you kindly posted, they both come out as Radient Light, not Radient Light and Medium. I don’t know if i’m doing anything wrong, it seems really strange. Any ideas?
Nick
-
Top Man Jamie. I owe you one, (well several now really).
Cheers
Nick -
That would be great Jamie. Very much appreciated.
Nick
-
Cheers Nick that’s great.
If anyone has got it i’d be really greatful, or can type the text – Rolfe & Jones.
Many thanks
Nick -
Can anybody help with this please, have tried all other ways of finding it,
and no joy.Many thanks if you can
Nick -
Hi Mark, i don’t know if this is the up to date one, but here is the one i have.
Nick.
-
Cheers Jamie, much appreciated
Nick
-
That’s Perfect Jamie, Top Man
Many thanks for all your trouble.
I never thought i’d get a result from this enquiry.
Nick.
-
Cheers Jamie, much appreciated. There appeared to be three TTF versions in the file, – all Natwest Bold. Is that how it should be, or should there be a regular and light version.
The bold one will be well handy for what i need to do, so many many thanks.
Nick
-
Thanks everyone for your comments and advice.
Jamie,- if you do have it on your fonts disc i would be very grateful if you posted it.
Nick
-
Here you go
-
I don’t have Bliss regular, but maybe one of these will suffice
-
Cheers Jamie, that’s brilliant. All installed and working fine.
Many Many thanks,
Nick. -
Hi Jamie, i’m not to familiar with OTF fonts, but would like to give it a try if that’s ok with you.
Nick
-
No Probs Marcella.
Thanks for looking, and if i don’t have any luck, i may use the one you provided, and see if i can get away with it.
Nick
-
Hi Marcella, it’s very very close. The one i’m looking for is called Caflisch Script Pro Regular. As usual the client wants it to be exact.
Many many thanks for you swift response though.
Nick
-
Many thanks all of you for your efforts – you’ve come up trumps yet again.
Sorry about the lousy image you had to go by as well
Nick
-
Hi Chris, can i ask you what you have attached to your reply. It has an RAR file extension, and i can’t open it.
If it is the text HLR, please can you attach it again as an AI, or EPS file.
Also thanks George for your suggestion.
Many thanks
Nick. -
Thanks Andy, the pattern will be applied to the sides and back panels of 8 Vauxhall Zafiras.
I think seeing as how many there are to do, applying individual white and red squares would take for ever, hence the thought of putting solid white panels down first.
I believe you can get thin translucent overlay films in different colours to apply over the white to achieve the red squares. these would be easier to cut than red reflective.Nick
-
Cheers George, you’ve saved the day again.
Hopefully i can re-pay you one day.
Nick
-
Top Man George – you don’t muck about mate.
Many thanks
Nick -
It sounds like a Eurasign Panel, which are available from Spandex – 0800 772633.
I know the panels are 700 x 500. Not sure about the gap between the holes though. I think it’s only about 220mm on them.But you can get spare panels.
Might be worth a try.
Nick
-
Thanks for all the suggestions.
Will be trying them out.
Nick
-
Thanks a million Dale, that’s a great help.
Thanks again Lorraine for your time and effort
Much appreciated
Nick
-
Many thanks Lorraine.
If you happen to have Bodega Sans Black, and it’s not too much trouble
pleeeease could you send it again. If not no bother I’ll use the one you sent and put an outline on it.Many thanks for your time and effort.
Nick -
Great Stuff! Thanks Dave.
-
Many thanks Nick, i don’t suppose you know where i can get it
for free (?) -
That’s BRILLIANT Andy, many thanks.
:uksbrules:
Nick
-
Many thanks everyone.
Once i had a name to go on, I found it under LITHOGRAPH, and also a very close version that goes by the name of LIDDIE.
Nick
-
Thank you Jill, – you’re an absolute star.
Nick, thanks for looking, and your suggestion
Nick
-
Thanks very much Nick, any idea where i can get it, – FREE if possible.
Nick
-
Top man John,
thanks to your ID, I’ve just downloaded it from a free site i
got from these boards.Many thanks
Nick -
-
Looks like Arial Bold to me
Nick
-
-
Thanks for the quick ID Nick.
You wouldn’t happen to have it would you?
Nick
-
Thanks a million Dale, perfect!
Cheers
Nick -
Cheers Dale, much appreciated
Nick
-
That’s perfect, cheers George
Nick
-
In Signlab 7, double click the image. When the vectorization menu opens,
select the eyedropper tool, hold down Ctrl, and click on the white colour in the Target Colour window, (above palette).
This should give you a transparent background to your image.Depending on the detail of the image, it might need some touching up in Photoshop or similar program.
Hope this helps.
Nick -
Cheryl, – here is the font, for future use.
-
Here is how the finished poster looked.
Martin, if you think your desk is untidy…….. you’re right 😀
Attachments:
-
Cheers Tim and Derek, very helpful. I will use the file you posted Derek, and then incorporate a man or women sitting at the desk from my clip art.
Thanks again both of you
Nick -
Hi Peter, I’m not really looking to cut the images, as i know it would be a nightmare.
I’m thinking i could print them onto clear film and make stencils out of them for our screen printing dept. Now i know that you can transform almost any image into a dot pattern, it opens up a whole new ball game.I had a play around using David’s instructions and got some pretty good results.
I don’t get to use photo shop much as we work mainly with vectors. so it was very interesting.
Many thanks for all your input.
Nick -
Cheers David, i would really appreciate that, – if only i could work out how to pm/email you
Nick
-
Thanks for your comments guys.
I would like to achieve results similar to the example shown by David.
If the dot pattern he created was achieved from a normal image, i would like to be able to do that.
A few tips on how to achieve this would be great, then i can experiment.
I only have photo shop 4 though, don’t know if this is a problem.
Thanks for your time
Nick -
Cheers George, Top Man!
-
Thanks all for your time
It was a typo, 😳 and 521 is perfect .
Many thanks
Nick -
Cheers Johnny, that will do the job nicely.
Thanks very much for your help
Nick
-
Cheers Shane, It’s Perfect!
You have just salvaged what was left of my Friday 😀
-
Thanks very much for looking, much appreciated
Nick
-
Top Man Jason, very much appreciated
Nick
-
Thanks George, i have Bliss Regular and Bold, but that’s always the way isn’t it.
They want the one you haven’t got 😕
-
It certainly is the one Adrian, thanks a million.
Nick
-
Top man Mark, that’s a great help.
Many thanks,
Nick