Forum Replies Created
-
thanks for ther replies, it turned out to be the encoder strip, cleaning it didn’t do anything so i turned it upside down and bingo, noticed the flat ribbon cable going to the sensor was slapping about due to ink dust build up so gave that a clean too.
-
Lloyd Morgan
MemberFebruary 7, 2015 at 1:50 pm in reply to: Help sourcing Roland Versacamm SP 300 parts in the UKthanks Chris
-
i use LG can’t remember the exact model number, 31** i think.
just asked my supplier to send me a sample of slightly thicker vinyl to see if its better. -
thanks for the tips
got it nearly 95% printing perfectly,really pleased with the quality.
noticed on the test print the magenta has about 4-5 nozzles clogged since i got it. produces very faint lines when you look closely at red prints. i run loads of cleaning cycles but its still blocked and i don’t want to waste ink. any ideas?
i could live with it but would like to have a perfect print even on close expectionis it advisable to put cleaning fluid in the cap and let it sit there overnight to unblock the nozzles? just a thought i had
-
hi all
thanks for the warm welcome,sorry for the delay in replying i’ve just got back from an expo in Hull all the way up in Yorkshire its a long old journey.
i’m going to have a look in the other rooms and do some posts.