November 6, 2002 at 10:40 pm
in reply to: FAST FONTS
I have fast fonts and they are images also. You have to manually put the supplied cut lines around them and they are individual letters. It is a pain in the arse. Much better off with adobe plug ins.
September 3, 2002 at 10:52 am
in reply to: safety signs
I don’t know if it would be the same in Ireland but here in oz the size is governed by the viewing distance. Mandatory signs for eyes, hat, gloves etc are usually 600×450 or 450×300. We make them from steel.
Gray,
I have never used the window splash vinyl, does the fluorescent stay a little greasy when dry? I use vinyl over fluoro a lot and even straight onto flat with good results. the trick is to use calendered not cast.
Cal+ will stick so will oracal 551, the best though and cheapest is arclad.
The glue feels like it’s from insulation tape but this vinyl will stick to just about anything but is not long term, ideal for splashes.
Report
There was a problem reporting this post.
Block Member?
Please confirm you want to block this member.
You will no longer be able to:
See blocked member's posts
Mention this member in posts
Invite this member to groups
Message this member
Add this member as a connection
Please note:
This action will also remove this member from your connections and send a report to the site admin.
Please allow a few minutes for this process to complete.