Replies – Forums – Richard Thompson

Richard Thompson

Member

January 26, 2020 at 12:24 pm in reply to: Transit Van Panel infill with vinyl help.

Hi

Wow i didn’t expect to receive the large amount of replies that i got, plenty to think about,

Thanks to everyone who took time out to let me have their surggestions.

Richard

Richard Thompson

Member

September 11, 2018 at 11:19 am in reply to: Recommended Mimaki parts supplier please?

Thanks for the info Gary 🙂

Richard Thompson

Member

September 11, 2018 at 8:47 am in reply to: mimaki genuine inks where to buy??

Hi Everybody,

I’m thinking of using third party SS21 ink for my Mimaki for the first time, Has anybody used ink from a company called "Digital ink direct" ? any issues?

Any third party brand that stands out better then another?

i wound be interest to know what ink Bernard is using as he’s had no problems for many years.

Thanks

Richard

Richard Thompson

Member

September 5, 2018 at 11:23 am in reply to: I have a CJV130 with the following problem just after any idea what it could be?

Hi Kev,

Thanks for the reply,

I replaced the the capping station few weeks back with no noticeable change, I will replace all the dampers this week and pump and ill see if it cures the issue?

Regards

Richard

Richard Thompson

Member

September 4, 2018 at 10:21 pm in reply to: I have a CJV130 with the following problem just after any idea what it could be?

Hi Kev

The machine is about 9 year old, had new printhead fitted by Hybrid a 3 years ago, in the time I’ve had it it not been heavily used, but cleaned regularly.

I myself thought it could be the dampers or pump? the problem its very odd, I can do test print one minute and all seems to be ok, then after doing a print job if i carry out a test print it shows large sections of colour banks missing??

I’m going to order 8 new dampers tomorrow and a pump to see if that cures it?

I’m still open to any other ideas that anybody has to what the problem could be?

Many thanks.

Richard

Richard Thompson

Member

February 12, 2013 at 1:16 am in reply to: Test Print Problems Mimaki CJV30-130

Thanks for the help everybody, i will take a picture of the printers print head and will post one.

Thanks again for the help.

Richard

Richard Thompson

Member

February 7, 2013 at 11:25 pm in reply to: Test Print Problems Mimaki CJV30-130

Hi John

What is a head strike?

Richard

Richard Thompson

Member

February 7, 2013 at 7:51 pm in reply to: Test Print Problems Mimaki CJV30-130

Hi Everybody,

Im getting a band missing when i run a test print on the black!

I Have done the following so far…

Cleaning: normal, soft,hard

Changed Capping station

I have read in this thread about using a syringe??
How do you do that. could anybody kindly explain how to do that "step by step"

Sounds like the dampers????

Thanks

Richard

Attachments:

Richard Thompson

Forum Replies Created