Kevin Chapple
Forum Replies Created
-
We used to supply most of the cab decals.
The official colour is fasson 900 soft red.
But most vinyl manufacturers do a close match -
You just right click the job
once it has ripped. select tiles
and highlight the one you
need to print -
-
hi
3M 220 Duranodic
from spandex -
Kevin Chapple
MemberNovember 9, 2011 at 5:32 pm in reply to: Gerber PC2 Plotter Problem, advice needed please?hi bill
doe it work without the cable plugged in?
-
hi Gareth
i use spandex slim slatz
hope this is some help….
kevin
-
Yes I think so as the ink vapour sinks.
The fan is set to suck from the bottom.
It seems to work well as you can smell
the vapours coming out the fan. -
-
Hi David i also mainly use md5 its probably one of the best..
but the oracle 3651 is very good and slightly cheaper. i get great print results with my jv33.
I’ve tried most of the competition and can’t find anything as good.
I’m shore someone will have a very different opinion.. -
Thanks for the reply. The idea of the big white label is that it is actually *on* the tyre – you can’t really see from the pic but its textured and rippled like its stuck to the tyre (as per customer request). Printed on 3m, lovely to fit but not so good to print – its a bit too dependent on the temperature of the machine and work area, when compared to other makes.
Yes, the vehicle was white, only painted parts are door hinges, all the rest is completely wrapped including roof. -
-
hi mate
haven’t got a ral code but British standard 2660 is bm82 208 0-008
-