[Darren Murdock]

quote Robert Lambie:

have you tried Hybrid or calling a technician Darren?

on a side note:
this may sound daft, but as your relatively knew. having a profile picture in place actually gets more replies than those without.

hi, in the process of uploading a photo sorry. not called a tech yet as it happened after 5 yesterday so all closed, £600 call out so hence why im trying to gain some answers from here,

[Darren Murdock]

anybody got a clue?? please im pulling my hair out here..

[Darren Murdock]

hiya i used to use one of these when i worked for a company who contracted all the NHS signage and the bed was made from Foamex 12mm i think , with a 2mm sacrifical sheet made from mdf placed on top, if you want to increase the suction block the rest of the holes on the bed which are not used with application tape or off cuts of plastic you have lying around this will increase the suction to the main area you are routing. This may be or may not be of any use but i hope it is.

[Darren Murdock]

Hi Denise,

I do a lot of canvasses on the JV33 with excellent results every time, used to have trouble with profile but now just use 1 generic profile for everything and it works well for me on vinyl, banners, canvas, static cling etc. What RIP are you using?

i buy canvas from get canvas plus, they have a cracking service and quality stretcher bars too,

http://getcanvasplus.co.uk/solvent-canvas-rolls.html

[Darren Murdock]

Hey thank you Nik.

[Darren Murdock]

Hi Alan, i use magnetic solutions for all my magnetic materials, they are cheaper than bisbell and have better customer service,

Custom work they can do too.

http://www.magnetic-solutions-ltd.co.uk/

[Darren Murdock]

Deffo a good place to live and work, there’s still old skool traditional sign writers too.

[Darren Murdock]

i had this on the mimaki solvent the other day and the temperatures were to high, was fine at one end and like yours the other end, dropped the temp and all was fine,