Activity Feed › Forums › Sign Making Discussions › Gallery › WARD: Various Signage
-
WARD: Various Signage
Posted by Ade Ward on May 30, 2010 at 5:28 pmHi folks
Not posted for awhile so here goes.
the usual mixed bag of work.
Thanks also to Gareth Lewis (Vitalsigns) for his fine work and help on retro and pentwyn pizza. Top man! even thou he will rubbish the lot but he might be selective i think!!! ๐ ๐Thanks for looking
Ade
Ade Ward replied 13 years, 10 months ago 8 Members · 16 Replies -
16 Replies
-
Apart from the last two or three, the usual poor display, I see.
:lol1:
Seriously, again, top stuff. I’d better shut my mouth now or my dodgy laminating ‘skills’ may be revealed….
-
Great selection of work Ade ๐ and yours Gareth………the things
you’ll do for Pizza and a chance to wear your 70’s flares ๐ -
Curious about the Moonpig – Surely that din’t have planning?
-
Tim,
I think the moonpig sign was a (very) temporary one for filming or something.
Neil,
I had no need to flap about in the flares, you will be shocked and apalled to discover that, as the music playing in the club was from the nineties, then THE NINETIES are considered as retro these days ๐ฎ
When did I get old?
-
quote Tim Painter:Curious about the Moonpig – Surely that din’t have planning?
Hi Tim
Yes they did have planning, it was done for a advert, so basically only up for two days while filming.thanks for comment
Ade
-
quote Gareth Lewis:Apart from the last two or three, the usual poor display, I see. :lol1:
Seriously, again, top stuff. I’d better shut my mouth now or my dodgy laminating ‘skills’ may be revealed….
your secret is safe…………………………….for now ๐ฟ ๐
-
quote Neil Davey:Great selection of work Ade ๐ and yours Gareth………the things
you’ll do for Pizza and a chance to wear your 70’s flares ๐Thanks for the comment Neil… no flares were used or harmed during the making of these signs.. Gareth might have been singing some Abba to himself while he worked but its 90s retro issue vinyl from the 90s.. custom faded ๐
Ade
-
quote Gareth Lewis:Neil,
I had no need to flap about in the flares, you will be shocked and apalled to discover that, as the music playing in the club was from the nineties, then THE NINETIES are considered as retro these days ๐ฎ
When did I get old?
Sorry homies, really showing my age…………… ๐ณ
-
Top work both of you. Glad to see that you have got that printer pulling its weight Gareth! Loving the retro work. ๐
-
I think the JPM needs some more text on it.
And some fruit.
๐
My fave of all is the Liberty one, really striking in its simplicity.
Love…Jill -
Some nice work there Adeโฆ thanks for taking the time to post it all mateโฆ
Quick question.
Did you fabricate your projecting sign in-house or buy in?
I am not sure if itโs just the picture, but is the projector illuminated by LEDโs?
Just asking as there appears to be spotting. Not knocking it all, just curious on how it has been done as I actually like the simplicity look of it.
Also, the bracket holding the projectorโฆ did you get this from http://www.signsystemsltd.com by any chance?[EDIT] having another look and the spotted might just be the shadowing of the routered text on opposite side of projector?
Not trying to tell you how to create your own work mate, but something to โconsider in futureโ. Your pan light box for Bang & Olusfen is illuminated by fluorescent tubes.
Only the text area needs illuminated obviouslyโฆ I recently did a small job and went for โLED barsโ. These come in various lengths and there is nothing too them. Double sided VHB tape or clips hold them in place. Almost flat strips of aluminium. Transformer and all is pretty much non existing in comparison to all the tubes and gear tray palaverโฆ illumination is not the yellow glow from tubes but a nice Ice white. Anywayโฆ just thought ide mention and thanks again for posting your work. -
some nice work there. ๐ Is that Moonpig sign on a house? ๐ฎ
-
quote :quote :Quick question.
Did you fabricate your projecting sign in-house or buy in?
I am not sure if itโs just the picture, but is the projector illuminated by LEDโs?
Just asking as there appears to be spotting. Not knocking it all, just curious on how it has been done as I actually like the simplicity look of it.
Also, the bracket holding the projectorโฆ did you get this from http://www.signsystemsltd.com by any chance?[EDIT] having another look and the spotted might just be the shadowing of the routered text on opposite side of projector?
Hi Rob
The spotting you see for sure is caused by shadowing.
The image shows Tubes not LEDS !?
How come you managed to notice spotting and not the image of Tubes??
๐ ๐
We didnt use signsystems we use a company here in Cardiff.
Not had much experience with LEDs myself but i will mention it to them, see what they have to say regarding the
benefits/costings/turnaround times etc.
The Job itself looks the business and im happy with it 100%Thanks for the feedback
Cheers
Ade
-
quote Marcella Ross:some nice work there. ๐ Is that Moonpig sign on a house? ๐ฎ
Hi Marcella.
Yes it was fitted to house for use in a advert, was up for a day, we then had to take it down. bit to big to pass as a sky dish!! ๐
Ive not yet received the final pictures for the night shoot, sign was illuminated and lights put around the house.
looking forward to seeing them, must have looked like the circus was in town.. ๐thanks for looking and the comments
Cheers
Ade
-
quote Ade Ward:Hi Rob
The spotting you see for sure is caused by shadowing.
The image shows Tubes not LEDS !?
How come you managed to notice spotting and not the image of Tubes??
Cheers
AdeHi ade
thanks for the reply mate…
no i saw the tubes image but i assumed this was for the fascialightbox?i was talking about the "projecting sign" because it looks like there is spotting in the picturewhere the "text" is. maybe just a shadow/light cast on it… but thought it was spotting at first and wondered how the managed to illuminate something so thin. i know it can be done, but was wondering how you did it. if indeed it is illuminated ๐
will make another post re-leds. just going to pour myself a drink. its friday after all ๐
-
[i was talking about the "projecting sign" because it looks like there is spotting in the picturewhere the "text" is. maybe just a shadow/light cast on it… but thought it was spotting at first and wondered how the managed to illuminate something so thin. i know it can be done, but was wondering how you did it. if indeed it is illuminated ๐
Hi Rob.
The small projecting sign has Fiber optics but it has not been connected to a power supply as yet.Thanks for reply
cheers
Ade
Log in to reply.