-
supplier please of built up letters with LED’s in them?
Can anyone help me. Got a good job to quote for. The sign panel is sprayed dibond or ali with 400mm high times bold text, 40mm returns and have LEDs in them to give out light through the sides of the letters. Letters also have brushed stainles steel fronts stuck to them. Anyone point me in the right direction to get a quality job done.
From
Mark -
4 Replies
-
Mark, firstly if the letters are acrylic so the sides of the letters are illuminated then that won’t give you a halo effect it will just light up the letters. If you want a halo effect the letters would need to be solid with a clear acrylic back plate.
As for suppliers try doing a search on the boards as it has been discussed a few times before. Appletec are very good plus you could try W.M Smith or Accent Signs. -
Hi Martin,
I can email you a photo of what I’m looking for. I can’t upload a photo on here for some reason.
If you let me have your email address I can email you some photos of what my client has had done before, by a company that went bust.
-
Mark, the suppliers I mentioned will be able to help you if it is some sort of illuminated lettering, try doing a search as I don’t have contact numbers handy.
As a Bronze member you should be able to upload a picture in the file swapping forum.
-
Here you go Martin.
I never knew that I could show of my work on here. I might put some on my work up later
https://www.uksignboards.com/viewtopic.p … 420#219420
from
Mark
Log in to reply.
