-
Spare parts order for dried up Roland SP 540V
Hi can you help me with this spare parts order for Roland Sp 540v
which has not been used for many years and now I am refurbishing
it this is the proforma order X2 means 2 sets so is the order right and
quanity ans or am I missing something or to much of.Thanks in advance :smiles:
x2-XC-540 Assy, Cap-Top 2 – 1000004546 / 1000002794
x2-SP-540V Assy, Tubing 2*1600MM – 22805555
x2-SP-540V Assy, Tubing 3*1000MM – 22805578
x2-SP-540V Assy, Tubing 2*1600MM – 22805555
Sx2-P-540v Assy, Tubing 3*1000MM – 22805578
x2-Epson DX4 Solvent Printhead
x2-Roland Solvent Cap Top
x1-Soljet Pump (ASSY SUB XC-540) – 6700319010
x4-SJ-540 Assy, Ink Damper 3 2FAI – 6081181200
x1-SP-300 Sheet Panel – 21475155
-
6 Replies
-
Not sure if the manifold comes with the print heads. You may need to order manifolds seperately? It may also be worth fitting a new encoder strip.
-
Thanks for that do you think the spare parts order is correct
as its is plus your suggestion ? -
I’m not sure what state the machine is in to warrant purchasing all that lot but it seems excessive to me. Plus you’re doubling up on cap tops.
-
I am a bit rusty on parts but check to make sure you are replacing like for like on the pump. I think the one you have there is the "newer" type and you may also need a bracket kit to make it work.
If it isn’t the newer type currently installed, it might be beneficial to upgrade to it anyway.
-
Blimey! Good to hear from you Mark 🙂
-
Thanks for your answears 🙂
Log in to reply.
