-
Roland printer printing short
Hi, just noticed that media been printed from out Roland ej640 is shorter than the art work sent. If for example I send a 2440mm long sheet I only get 2430mm! Anyone any ideas as to why? Have a load of 8×4 boards that now need 10mm trimmed from them [emoji20]. Thanks
-
1 Reply
-
The final length of the print will depend on the feed calibration, which you can adjust.
If the lines are tight together the whole print will withdraw a bit.
As you adjust for wider print strokes, the end result will be a longer print.
Log in to reply.
