Activity Feed Forums Printing Discussions General Printing Topics Printing onto static cling

  • Printing onto static cling

    Posted by Mark Shipley on August 30, 2004 at 10:56 am

    Hi all,

    I’ve tried printing onto Hexis white static cling series D7202 with a Versacamm – MD5-100 profile, 720dpi, 8 passes per line, variable dry, headspead 760 with print 40oC dry 45oC, then cut when cold.

    The problem I’m having is that sometimes when a sticker is removed from a window a small amount of ink in left behind on the glass. A test sticker I did months ago has left no ink and one I produced a couple of weeks ago has, both on the same window. 😕

    I understand that this particular vinyl might not be 100% suitable for eco-sol inks but has anybody had better success with this vinyl/profile/settings or can you recommend a more appropriate static cling vinyl?

    Many thanks in advance for your help.

    Mark

    P.S. mug shot will appear after hangover has ‘eased’ 🙄

    Martin Armitage replied 19 years, 8 months ago 2 Members · 2 Replies
  • 2 Replies
  • Mark Shipley

    Member
    September 8, 2004 at 6:50 am

    Any thoughts on this would be appreciated 🙂

    Mark

  • Martin Armitage

    Member
    September 8, 2004 at 7:24 am

    How about reverse printing onto clear, the ink will not come into contact with the glass then.

Log in to reply.