-
Print issues on Jv33
Hi guys.
Our warranty expired on our Jv33 last month & we’ve developed some issues with it printing solid block and gradients. – I’ve contacted our engineer, in the meantime, I just wondered if anyone had an idea what was causing this issue.
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Moderator Edited to conform with Board Rules
please use the upload facilities within the forum or images will be removed
Please take a moment to read our Board Rules -
5 Replies
-
Too much tension on the roll? check by unwinding some media before printing.
Or perhaps static?Sorry it’s all I can think of.
John
-
Thanks for getting back to me mate, I’ll have a look and get that tension off the take up.
-
i would go with static as well
-
Cheers guys. – Last time we had the engineer out he fitted static strips on the front and back of the machine.
-
Think i’ve managed to cure it..
Originally I sent it on immediate print. – I think the heads been coming back to rip more data and the over-tensioned take up unit has been constantly pulling it down whilst ripping.
Have just run it again on rip and print and reduced the tension. – No issues at all.
had the thing 3 years and still hitting (expensive) learning curves..🙄
Log in to reply.
