New Member introduction. hope its in the right place.

[Robert Lambie]

welcome to the boards Andrew, great to have you here.
please consider loading your profile picture also. makes all the difference to your posts and the site on the whole.

Look forward to seeing more posts from you!

[Richard Wills]

Hello Andrew,

Just about to get one as well – in a similar boat, so don’t feel alone.

Great thing about this board – seemingly silly questions are the ones you don’t ask.

[Iain Pearson]

Greetings Andrew, good to see new faces.
We have worked heavily with FlexiSIGN for many years, so if you need any help or guidance feel free to give me a shout.
I’m based in Suffolk and will happily offer you some free training if you are ever over this way [emoji106]

[Warren Beard]

Welcome Andrew [emoji106]

[David Hammond]

Welcome to the boards.

I’ve been using graphtec plotters for 8 years. You’ll not go far wrong with them. Lots of advice and help on these board, I’m still learning things now. :thumbsup:

[Martyn Heath]

quote Iain Pearson:

Greetings Andrew, good to see new faces.
We have worked heavily with FlexiSIGN for many years, so if you need any help or guidance feel free to give me a shout.
I’m based in Suffolk and will happily offer you some free training if you are ever over this way [emoji106]

Its a small world Iain, i see your based in haverhill. Before i left the country 6 years ago now, myself and my sign company was based in Glemsford, next to sudbury.

[Jean Oakley]

Hi Andrew, welcome to the site, Ive worked with Graphtec and Flexisign for 23 years so if you have any questions ask away :smiles:

[Neil Davey]

Hi Andrew and welcome. I’ve run Graphic plotters in the past and they’re a good piece of kit.
I started using flexisign back in ’94, it’s very user friendly.
If you ever have any problems give me a shout!

[Iain Pearson]

quote Martyn Heath:

quote Iain Pearson:

Greetings Andrew, good to see new faces.
We have worked heavily with FlexiSIGN for many years, so if you need any help or guidance feel free to give me a shout.
I’m based in Suffolk and will happily offer you some free training if you are ever over this way [emoji106]

Its a small world Iain, i see your based in haverhill. Before i left the country 6 years ago now, myself and my sign company was based in Glemsford, next to sudbury.

Hi Martin
Yes it is a small world indeed. We used to be in Haverhill but recently moved to a new larger office in Woolpit near Bury St Edmunds

[Hugh Potter]

Welcome to the forums Andrew!

#notaclueaboutflexi

[Martin Pearson]

Welcome Andrew, thanks for taking the time to say hello 😆 😆

[Cheryl Smith]

HALLO ANDREW!

[Myles Brewer]

Hi Andrew, welcome aboard.
I started 16 years ago with flexi 7 & a 2nd hand Graphtec CE1000-60 which was about 5 or 6 years old. Still using the very same plotter today & never a problem with it!! Must be classed as an antique nearly [emoji16]. Using flexi 12 subscription now. Have always found it a great bit of software & with subscription you get all the updates & backup you need at a very reasonable price.
Good luck to you, you’ll find a wealth of experience on here along with great advice & a good smattering of humour to boot. [emoji106]

[Duncan Wilkie]

Hi Andrew. Good to have you aboard.