-
More wrap advice please
Hi guys,
got another semi wrap to do! I am not sure whether to print/laminate and apply as one, or whether to go down the cast vinyl route? what are your opinions? I have allowed 3 days to do this job. I would love it if some of you experienced wrappers would pm what you would charge for this and i’ll tell you what ive quoted.thanks as always
Dan
Attachments:
-
3 Replies
-
If it was me I would go down the self coloured cast route as printed black never look as good imo. With regards to fitting you have allowed yourself plenty off time I could do that in less then a day easily enough. Make sure you are careful when removing the grey stripes as the clips have a tendency to break if not careful.
-
Hi Dan
I agree with Chris, part wrap cast black and apply graphics on the top.
It a lot less hassle, easier (and cheaper) to replace if needs be and the black will be a stronger black.
Again, a day would be more than enough so with 3, your more than covered for any eventualities!
Matt
-
hi guys,
thanks for your comments, can you recommend a good cast wrapping vinyl? Do they come laminated? Just worried about scratching the surface of the black? are the glues re positional like wrap vinyl? we have always printed our wraps!cheers
Dan
Log in to reply.
