Activity Feed › Forums › Printing Discussions › General Printing Topics › Label Printing Set Up – advice please
-
Label Printing Set Up – advice please
Posted by gizzy75 on January 7, 2005 at 6:34 pmHi Folks.
I would like to get into the printed label market. Does anybody have any suggestions for a realistically priced set up to print full colour sticky backed labels?
Cheers
Dave ERoy Roffey replied 19 years, 4 months ago 5 Members · 7 Replies -
7 Replies
-
Hi Dave,
There are a dfair few print & cut printers on the market now.
Probably a thermal machine would be a good entry level unit.
I don’t have one, but I have seen some pretty impressive stuff here done with a PC60. That may be a good start.
Really depends on your level of committment, size of your bank balance, and level of experience.
I have a Roland 1370 print & cut, but that is ion the area of $au70,000. A bit excessive as a start up unit
Hope this helps
Shane -
shanes adice is good mate…
Roland make PC60 & PC600
best start up package for labels (as far as i know) is roland pc60 or 600. i had one several years. having started with it gave me good experience in dabbling in print, as it made life much easier when we upgrade to a machine similar to shanes.
a pc-60 being the older version of the pc-600 will cost from £1000 ONWARDS.. depending on condition and extras. there are many many posts on this site covering this machine, do a search, its worth the reading.
next step up is gerber edge, 1 or 2….
good machine, more expsive but like the pc60/600 has its own issues. back posts will explian.for faster labels & better quality go for a cadet or versacamm… new on the market. fast printing, fast cutting and much lower cost ink… machine costs £8995
-
hi
i got me a pc-600 for labels and small logo / pics, just a quickie bt how much would you guys charge for 1″ x 2″ labels, 2 colour on white vinyl??just need to know if im ripping anyone off??
roffs
-
As a rough guide, I aim to charge between 4 and five times materials cost for these
-
Roffs,
I tend to agree with rightsigns. 😕
I would be looking at your material costs per sq mtr (or is that feet in your part of the world?) and multiply them by 4 or five times for the ‘trade’ and 5 or 6 times for retail.
I find it a good idea to have a built in trade price because it leaves the options open for contract work. If your only price is your ‘best’ price, you have no room to move for a ‘qty’ buy.
From experience this should cover your labour and material costs, and give a reasonable marging if they are being on-sold.
Don’t forget to about the PV (preceived value) of a job. If the job looks really smart, and the client is ‘blown away’ by the quality/design/service, this will allow you to charge a better price. The PV of the client will always be higher in this instance.
Just my thoughts, but you would obviously know your market better than me.
Cheers
-
hi guys thanks for response,
this is what i also do when costing labels etc. as i do alot of vehicles and fascias the label market is a whole new ball game cost wise. i couldn’t sleep at night if i had ripped someone off!!!!! ( dream on )
roffs
Log in to reply.