Posted by Freddy.Tait on August 4, 2005 at 9:40 am
hi list users
can anyone give input regarding
gerber envision sprocket fed machine
any idea of price etc
any problems or experiences
all comments welcome
also info on advantage 6.2 software
thanks from freddy in sunny scarborough
I used one years ago. Worked fine. Only drawback with sprocket fed machines is that you are obviously limited to a fixed width of vinyl. Sometimes it’s more economical to use a narrower width. Sprocketed machines tend to perform well with very long runs of vinyl and can handle this much better than friction fed machines.
I use one in conjuction with my edge, never had any problems with it. OK so its only 380mm but it is a fast and acurate machine. very good for long runs of small repeats. Cant advise on price though, they were expensive when I bought mine. but are you buying new or used?
I never liked omega, but it depends on what you have used before and how you feel with it.
Peter
Please note:
This action will also remove this member from your connections and send a report to the site admin.
Please allow a few minutes for this process to complete.