Ideas of a New print head cost please?

[Gary Birch]

Mike
From memory it’ll be approx £450 for the print head and depending on the engineer £180 -200. I got him to service the machine while at it too.

+ VAT of course

Cheers

Gary

[Stafford Cox]

I’d say around £550-£600 + VAT for the head and a callout (usually around £160 + VAT). Depending on where you are and where the closest engineer is.

Stafford

[Craig Gibson]

Mike, try Digiprint.
Good prices and very good service.
They are easy to fit if you take your time.

[Robert Lambie]

quote Gary Birch:

Mike
From memory it’ll be approx £450 for the print head and depending on the engineer £180 -200. I got him to service the machine while at it too.

+ VAT of course

Cheers

Gary

from memory ide say about that too…
I got ours from Digiprint Supplies too. if no special offer running on the heads, use the advert code on the homepage for discount. further discount again for UKSG members. just remember the UKSB codes cant be used along with a special offers they are doing.

[Mike Grant]

Thanks guys, now I better start saving. 😳

[Alan Drury]

Doesn’t take many of those to punch a whole in your profit does it!!
Alan D

[Mike Grant]

My problem is my machine sits idle for long periods as I don’t get a lot of use out of it so this sort of expense is not good for the pocket. 😥

[Alan Drury]

I suspect I would be in the same position and that is why I outsource all my print. It’s a bit of a chicken and the egg situation ie would I sell more print/push digital more if I had the convenience of my own machine. So tempted – too broke:(
Alan D

[Mike Grant]

Don’t get me wrong, the machine is 7 years old and there has been very little problem until now. My work that I had it for has dried up but is still used but at the moment work has been a bit quiet and I need this expense like a hole in the head.

[Phill Fenton]

Are you sure the head is faulty and not something else causing you to think the head needs replacing?