help with an A4 stainless steel supplier please? - CNC Router and Engraving - uksignboards.com

CNC Router and Engraving

help with an A4 stainless steel supplier please?

Posted by Kate and Danny on July 13, 2007 at 9:12 am

Hi

I am trying to find a supplier of pre-cut stainless steel at A4 size, an off the shelf item really and only need a couple of pieces at present. Had no joy sourcing it locally, wanted to see if anyone had any details of a company that would post.

Have tried Mastergrave but they don’t do stainless steel.

Thanks for any help,

Kate

Steve Morgan replied 16 years, 9 months ago 4 Members · 5 Replies
5 Replies

Robert Lambie

Member
July 13, 2007 at 9:28 am

i would try a stainless steel fabricator they will have off-cuts that size.
i have one next door but they are closed till tuesday and not the most helpful. 😕 if you go to suppliers i doubt you will get anything smaller than full/half sheet size.
Peter Normington

Member
July 13, 2007 at 9:45 am

Kate/Danny
I have an A4 piece of stainless you can have, the "shiny" side is a bit scuffed but the Brushed finish side is fine,
Lynn pm’d you last time you asked!
PM your addy and I will post it, if its what you need, I can get some more off cuts for you next week;

Peter
Peter Normington

Member
July 13, 2007 at 9:47 am

PS I think themagictouch do a4 size stainless in packs.

Peter
Fred McLean

Member
July 13, 2007 at 10:50 am

Suregrave do stainless by the squ. inch 😀
Steve Morgan

Member
July 13, 2007 at 11:22 am

Kate,
Look up the section ‘Sheet Metal Work’ in your local yellow pages, you’ll find someone in there who works with stainless who will have an offcut.
From memory a 1220 x 2440 x 2mm brushed finish is about £100.00 inc vat

Steve

Log In to Reply

Log in to reply.