Help identifying this sign system please? - General Sign Topics

General Sign Topics

Help identifying this sign system please?

Posted by Robert Lambie on June 21, 2007 at 11:01 am

Looking for some help identifying this slat system.
its basically an aluminum slat holder. we have used this one in particular a few years back but i cannot remember the source. it came in a length of about 10ft and you basically cut it down to the require slat length.

The black backing doesn’t come with it, these slats have basically been stuck onto the face of black perspex.

thanks in advance for any help with this. 😀

Attachments:

Robert Lambie replied 12 years, 7 months ago 7 Members · 12 Replies
12 Replies

Glenn Sharp

Member
June 21, 2007 at 12:05 pm

It looks similar to Graphex’s millenia system Rob
Glenn Sharp

Member
June 21, 2007 at 12:10 pm

It looks like there web site is under construction so I can’t check
Gavin MacMillan

Member
June 21, 2007 at 12:21 pm

Planx by Nova polymers? not sure though.

G
David Lowery

Member
June 21, 2007 at 12:33 pm

Does it take an insert?
Is it a nameplate holder?
If so, try Pantograph Services.

Dave
Graeme Harrold

Member
June 21, 2007 at 3:07 pm

Looks very similar to this stuff from Mastergrave

http://www.mastergrave.co.uk/downloads/files/Mastergrave%2007%2054.pdf

It comes in 3m lengths and accepts 25 or 50mm slats at 1/32" thickness.
Robert Lambie

Member
June 21, 2007 at 3:33 pm

thanks a million glen, gavin, dave and graeme for all your help.
the ones dave and graeme have posted looks like the one i am after!

thank you very much! 😛
Robert Lambie

Member
October 5, 2011 at 10:56 am

I have just been Googling a sign slat system which im positive i have used in the past.

after dozens of pages without success, i started searching google images
which is often a good way to find something faster "visually"
having done this i came across the slat system i am after…

Bizarrely enough the "IMAGE" was hosted HERE on uksignboards.com 😮

even more Bizzar… the image is HOSTED in a POST that "I" made asking if anyone has seen the same slat system i am asking for now! 😳 :lol1:
the post i made was back in 2007 :lol1:

anyway, History repeating itself here….
I desperately needing this slat system i have attached at the start of this thread. i cannot remember where i got it but i have checked all the suggestions made here. either tehy dont have it or the site no longer exists.

any help advice would be great.

thank you in advance…
Gary Birch

Member
October 5, 2011 at 11:11 am

Is this the stuff u mean??

http://www.pantograph.co.uk/pdfs/plate_holders.pdf

Cheers

Gary
Tim Painter

Member
October 5, 2011 at 12:51 pm

Just another possible.

http://www.universal-aluminium.co.uk/do … e_2007.pdf
Robert Lambie

Member
October 5, 2011 at 12:53 pm

Gary your a star mate, brilliant… thank you!

think i better stick this one on the toolbar now before i forget :lol1:
Gary Birch

Member
October 5, 2011 at 1:30 pm

quote Robert Lambie:

Gary your a star mate, brilliant… thank you!

I got that link from here Rob so no need to thank me mate, you are just reaping what you have sewn 😉 :uksbrules:
Robert Lambie

Member
October 5, 2011 at 2:04 pm

:lol1: 😉