Greetings from Glasgow

[Robert Lambie]

Welcome to the boards Steve, good to have you here mate….

please post any questions etc you have in separate relevant forums.

[size=92]* As this is your "Intro Post", please take a moment to look over our Board Rules.
* Please also consider loading your own Profile Picture to accompany your posts. [spec on profile pictures can also be found in Board Rules ]
This is not an necessity, but it is fact, posts accompanied by a full proper user-name and photograph get much more help/advice/replies than those without.
* To edit your profile and load a picture Click Here[/size]
* You may also find the following FREE to download Toolbar very useful for your Sign Making business. UKSB TOOLBAR

.

[Nicola McIntosh]

welcome to the boards steve 😀

nik

[David Rowland]

hi there… there is many from guys/gals in same situation as you, pretty much all come from Glasgow and surrounding areas 🙂

[Brian Little]

hi Steve welcome to the boards mate

Regards Brian

[Peter Mindham]

Hi Steve,
Welcome. Another Scot in the bar next sign show then! 😀

Peter

[Jill Marie Welsh]

Hello from Pittsburra.
Been self employed 25 years now and still broke.
Love….Jill
PS
Peter every time I see you in that hat I get a big grin.
😀

[Brian Little]

welcome to the boards Steve

Regards Brian

[Martin Pearson]

Hi Steve, welcome to the forum.

[Graham Shand]

quote Steve-P:

Hello Signmakers,

I’m Steve from London, but now plying my trade in Glasgow. I’ve been a screen printer for 20 years and like most self employed folk out there, it looks as if I’ll be doing it for another 30 or 40 years! I’ve also had a lot of experience in vinyl cutting (using a Summa) for the past 12 years.

I’ve just acquired an old Roland PC600 from my friends in London, but I don’t know how it works.

I use a Mac PowerBook G4 with Photoshop & Illustrator CS & FreeHand 10. I’ve installed ColorChoice4.1 (in the classic environment – not my preferred method), so I was wondering if there was anyone out there who could advise me on software updates & web training on the Roland for use on Mac OSX.

I want to use the Roland for very short runs of cut stickers, with a view to developing a market & perhaps later investing in a Cadet or VersaCamm.

Any help would be much appreciated.
Steve

Steve, you can download the Roland pc 600 owners PDF from
http://www.signcutpro.com/files/man/rol … E_E_R5.pdf

regards Graham Shand

[Phill Fenton]

quote Brian Little:

hi Steve welcome to the boards mate

Regards Brian

quote Brian Little:

welcome to the boards Steve

Regards Brian

I shall say this only vonce..

Hi Steve – welcome 😀

[Steve-P]

Hi Graham,

Thanks for that, but I already have the original hard copy of the operators manual.

I’m stuck on the software solution to it, could there be an open source or Mac OSX version of Roland’s ColorChoice??

[Lynn Normington]

hello Steve welcome 😀 you would be better asking questions in the relevant forums.

Lynn

[Steve-P]

Thanks Brian & Lynn

For your kind welcomes. I’m still finding my way around.

Steve