Activity Feed Forums Sign Making Discussions Vinyl can the vehicle outlines disk assist with contour cutting

  • can the vehicle outlines disk assist with contour cutting

    Posted by Jill on July 11, 2002 at 8:43 pm

    How does everyone cut the vinyl around door handle recesses and wheel arches etc. Can it be done from the vehicle outlines ( although have tried but doesnt cut near enough) or do you trim after application with a scalpel. Have seen it done on a few of your pics before.
    Maybe its another demo for you Mike 😆

    Phill Fenton replied 21 years, 11 months ago 3 Members · 3 Replies
  • 3 Replies
  • Robert Lambie

    July 11, 2002 at 9:34 pm

    quick reply! no no no… 😆 😆 😆 dont rely on the vehicle disks. they are not accurate enough for this kind of thing.
    trim it on the van. use a brand new blade always! and cut once very light.
    practice on a peace of painted metal so you can get a feel for the pressure to use. after you trim it. peel the vinyl all off. if you have a cut in the paint you need more practice 😉

  • Deleted User

    Deleted User
    July 11, 2002 at 10:26 pm

    I agree with rob we do alot of vehicle graphics all the time and we cut afterwords ! templet ar really for layout purpose or they never right!

    Oreo 8)

  • Phill Fenton

    July 14, 2002 at 10:09 am

    I use the same method as Rob. The only thing to be wary of is not to cut into the paintwork of the vehicle. If you cut too deep the bodywork will eventualy rust in this area so be very careful. As Rob says – use a new blade and lightly cut the vinyl making sure you leave the paint surface intact.

Log in to reply.