-
bulk ink system advice
i have a ink system from ink label.com.It doesnt work at all with my epson c86 even though it says its compatable.I have broken 2 c86 printers trying to get them working,now these printers wont even work using genuine cartridges.
Im looking to buy a ink system with sub ink already set up for me to use immediately.Any ideas?Really to get some mugs and plates pressed and start making some money.
Any ideas ?
cheers(mod-edit)
-
10 Replies
-
Have a look at http://www.thetransferpress.co.uk The bulk systems they sell are reliable and easy to set up as the carts and tubes are prefilled.
Cheers
Jim -
Hi I did reply to the earlier post but that was removed or closed by the mods I presume, I have the same system from inkjet and it is a nightmare to set up, the black ink cable broke loose when I was checking for blockages, lost the ink and took me hours to clean up.
If you do get a decent system let me know how you get on.
Thanks
Sconie -
(mod edit) please read board rules – no supplier advertising please
-
Hi guys
I got my printer (1290) with a bulkfeed system from printerowners http://www.printerowners.co.uk.
ended up getting a complete mug package from them. carts came primed all i had to do is attach the tubes to the bulk bottles and i was up and running within 15 mins.
cheaper than the transferpress package deal
really helpfull, if you phone try and speak to a martin broad (director), great guy.
http://www.printerowners.co.uk
tel : 01202893166hope this helps
-
how much did this all cost paulo?
regards kev -
hi
In the package i got the following
epson 1290 printer
mug press
200 a4 sub paper
bulk feed system, with primed cart and tubes
6 bottles of ink
216 standard mugs 11oz
100 styrene mug boxespaid just over £1300 with vat
-
that is a bargain!
-
Kev
Xpress also do a bulk ink system, I think it’s about £600 fitted, the Epson 1290 from them is £300 and I’m sure you could blag yourself some freebees
Martin
-
ive approached printerowners and the best price they gave me was £435 including vat for system and a c86 epson,ive also asked others to give me best price.Anyone know of anywhere else?
I have asked transferpress and listawoods and xpres. -
In the end i got my bulk system from printerowners along with a craft robo and a c86 epson a starter pack for my craft robo with loads of different vinyls and papers.Cost me about £700 including postage and vat.
Bargain and also they are very helpfull.
Log in to reply.
