-
B&P, I finally solved my problem after 3 years!
Thought i’d take liberty of sharing this. 3 years ago i purchased a (reconditioned) grenadier from b&p.was a total newbie but 3 years later taught myself and with much grief have graduated to a novice techie (no decent engineers where i am). Anyhow to cut a long story short this is the last problem (hopefully) of the many i’ve tried to solve.The light magenta and light cyan never worked properly, so for 3 years have been printing just cmyk. Anyhow with a weekends spare time on my hand, investigated trouble shooted and solved. No o rings used on the connector between ink line and the rear of cartridge. Was a bum to get to but managed in the end. Now who would have imagined that!
-
4 Replies
-
well done good feeling when you sort that sort of fault.
ps what took you so long 😉
-
amazing! no o-rings.. i think thats amazing
-
So B&P sold you a reconditioned printer with no O-rings then? Sounds about right!
-
I had the same problem, I was getting ink starvation on magenta, changed filters, pulled the machine apart and found air getting into the tubes at the joints. My machine was new or so they said.
Log in to reply.