-
Advice on large sign for steel clad building
Morning all,
Need some advice on producing a large sign which is going to be mounted onto the side of a steel clad industrial building.
The sign needs to be 4700mm long and approximately 800mm deep. I dont want to suggest just screwing dibond straight to the building but wondered what might be a better option.
I’d thought about a sign tray with mounted graphics – but really need some guidance please.
Best wishes
Andy -
5 Replies
-
Hi Andy,
we just use Splayed rivets and touch up the heads with One Shot paint or any metal paint will do.
http://www.wurth.co.uk/fasteners-genera … t-4-8x21mm
-
tray all the way
-
Any suggestions on supplier who can deliver a tray that big?
Andy
-
Andy fitted one similar to that size this morning but obviously it was in 2 pieces
look here they do them in various ral colours and they are great qualityhttp://www.blackburnssigns.co.uk/sign-t … spoke.html
the tray we fitted in 2 hours this morning was 4500mm x 700mm x 50mm return
G
-
As that good looking man above me says Andy.
It must be a tray 4700 x 800 is a dinky one, you’ll have that up in no time.Appelec are also very good and dare I mention….Ashby aswell 😀
Log in to reply.
