Forum Replies Created
-
firewithfire
MemberMay 3, 2007 at 12:31 pm in reply to: enlarging images for wallpaper – any ideas??sorted – i got a demo version and it seems to work well – cheers – looks like i’ll have to purchase it
-
firewithfire
MemberMay 3, 2007 at 10:54 am in reply to: enlarging images for wallpaper – any ideas??how do i upload image file ??[/img]
-
-
-
firewithfire
MemberMarch 9, 2006 at 4:51 pm in reply to: URGENT FONT HELP NEEDED = helvetica rounded bold????thankyou kindly 😀
-
it certainly is
thanks a lot 😀
-
thanks chris will look at the 9700 :lol1:
-
my rule of thumb with this is just to inform your clients of the implications of each process i.e. sticking vinyl on a van WILL make the paintwork look different in 3 years time when they sell it or change graphics etc. keep them informed throughout the discussion,design process and keep it simple – THINGS WEAR OUT OVER TIME. you should have no come back if they are made aware, its only the very few @rsey , cheap as chips types that keep you coming back to touch up or make good. trust me i have learnt from experience…………….. if you set high standards for your self from the offset you should have nae bother.
-
to be honest i have found that the best ‘weeding’ device has been an old rusty compass that i have had since maths at school.
i have numerous ‘modern’ scalpels, stanley knifes and a VERY good knife called the ‘Knack’ (15 blades in a magazine – the bees knees) which help for general purposes but the compass is perfect for ‘lifting’ away vinyl without cutting into the finished vinyl, which i found to be a problem when using a blade.
first things first, before you even cut, if it is not inverted add a rectangle around the graphic to give it a border, then take out the middles (it helps with seeing whats before you) , then pull away the vinyl in the direction with the most verticals (i.e. from the left of a capital R).
hope this helps
-
firewithfire
MemberJuly 28, 2004 at 4:42 pm in reply to: can anyone help me with blade problems and the CX 24?cheers frank
i tried the internal test cut to no avial
will play around with the offset option in the meantime 😕
i tried smooth On & Off – the decal is text so detail is rounding off (especially with the cr@p blades)
i’m hoping a bit of trial and error with the offset option will work this out – i’ll let you know