-
Trying to source pop-up system media, please help?
hi all i have a pop up system to refurbish and am looking for media for this .
anybody done similar and can point me in the right direction
sizes are 675mm x 2.3000 x 6 panels it is quite flexible as two end panels curve in a full arc at the ends. it looks and feels like cardboard type.
need the media as i will print and flood coat it
ta in advanceDerek
Attachments:
-
6 Replies
-
Hi Derek,
you need light block material from Grafityp or Robert Horne its the 310mic stuff, i always prefer to laminate with a Crystal laminate and if your refurbishing make sure you can get hold of the hanger bars there are that many diff types it can be a struggle to find sometimes
Robert
-
thanks robert will check them out in the morning i have new hanging bars just need some mag strip for the edges .thanks for the pointers
derek
-
We use iPro from Papergraphics for pop ups with a crystal lam & you don’t need a thinner mic material for the end caps.
-
We use iPro from Papergraphics for pop ups with a crystal lam & you don’t need a thinner mic material for the end caps.
-
thanks kev
derek
-
Ive been using PaperGraphics for this sorta thing too… roll-ups etc
Log in to reply.