.

[Kevin Flowers]

Dean
either direct from Roland or someone like Tech Eight remember to look for the reason the fuse blew in the first place.

Problems could be: Ribbon cables, Bad Head etc
Word of caution do not apply too much heat to the new fuse as this can cause them to fail

Say hello & more people will welcome you help if they can

Kev

[Dean Willoughby]

Thanks Kev

[Kevin Flowers]

Dean
the most common fault is someone has let ink/solvent get on to the head circuit board once its dry its not normally a problem. Don’t be tempted to try any other fuses it doesn’t work. The fuses are £2.50 from Tech Eight buy a few if it blows as soon as you switch on disconnect the heads ensuring the cables don’t short out & fit new fuse & see if it blows again. You do this with all the cables all the way back to the main head board, eliminating items as you go. Hopefully you understand what i mean. Ensure you have it unplugged from the mains when removing cables.

Kev