-
SOLD : Roland XC 540 Pro 3 printer and Easymount laminator
Sorry Now Sold
Apologies to those that messaged before about our equipment. Due to technical issues We weren’t able to reply to anyone so apologies for this. All the gear is still currently available as of 11 February 2019.
Here for sale our Roland XC540 Soljet Pro3 print and cut printer. I’m sure if you’re looking at this you’ll know about these machines – very capable and very fast. Much quicker than the standard SC545 or VP or SP series of printers.
These are a great machine – a real workhorse and ideal if you’re just starting out in the industry. This machine has recently had 4 brand new DX4 print heads (these are close to £500 each and have done no more than 5 hours work), head cables, dampers, caps, wipers and a brand new bulk ink system just very recently installed worth over £400 and 4 x flush cartridges. Currently running Jetbest inks @ £26 per 500cc
Also had new scan motor, pulleys and belt, heater apron circuit board, smart plotting knife, cleaning kit etc. Spares including new encoder strip, long media clamps, scan motor
This is a 6 head system set up for CMYK LmLc. Print head test is great as you’d expect. Has the optional extra overhead blower dryer and extended heat plate (all working).
This machine will print up to 41 sqm per hour !
What you’re getting is a whole system including laptop that’s configured to work with the printer. Loaded with Versaworks, Bench.
We’ve now slowed up/winding down on sign making so all are in storage but I’m still using them for occasional jobs and still powered and working
So to summarize what you’d be getting for the price :
Roland XC540 Pro 3 54" printer with 4 x new print heads, 12 new dampers, caps, new heater control board, scan motor etc
Configured laptop (old and slow but works)
New Bulk ink system with almost full inks
4 x flush cartridges
8×4 bench stands
Easymount 1580 laminator (heated top roller). Some cuts to the bottom roller. Top roller fine. This was purchased but not used. We’ve fired it up and it heats and operates as it should.
This is a whole set up ready to use. As these things are quite delicate I can’t offer any warranty I’m afraid but of course you’re welcome to come and view, test, trial etc without obligation.
We’ve used various Roland printers for over 13 years and have extensive knowledge of them so happy to help out where I can.
The print quality on this machine is very good.
You’ll need a really big van to transport all away and 2 pretty strong people to lift (happy to help with this)
Youtube video showing printer in use
https://www.youtube.com/watch?v=p8XaUWTmzB8PRICE £5395 firm for it all. Located Bury St Edmunds Suffolk
Drop us an email at : hex_sign@icloud.com
Attachments:
-
0 Replies
Sorry, there were no replies found.
Log in to reply.