-
**SOLD** – Roland Camm 1 Pro CX500 54" Vinyl Cutter
Hi all,
We have for sale our mint condition Roland CX500 Pro vinyl cutter as upgrading to a print and cut machine.
I will post pictures and info when i return from working away on Saturday.
Any questions please do not hesitate in asking.
Cheers
Gareth
-
21 Replies
-
An excellent piece of kit I am missing it, far superior to my Graphtec. 🙁
Cheers
Dave
-
i would keep it gareth…
keep the print and cut for just that…
keep the vinyl cutter for cut vinyls only…
just my opinion/view but wouldn’t be me. 😀
.
-
Just a little bit more info on the cutter we have for sale.
The photo attached is quite old, the machine is very clean and very well looked after.
It has a brand new Smart knife fitted only last week, and is cutting / working perfectly and can be seen before purchase.
The width is 1370mm and its cutting width is 1195mm, maximum cutting speed is 850mm per second, maximum force is 350gf
It weights 55kg and comes complete with stand and rollers & leads to run it. the driver cd’s (& Roland Cutstudio) are there also if required and a user manual.
It also has an automatic 4 point registration system for accurate contour cutting of prints and comes with automatic sheet cutter.
These retailed new for about £3500 now a GX500 same machine really, looking for a quick sale so offers around £1500 please.
More photos tomorrow.
Ta
Gareth
Attachments:
-
Dave it has never missed a beat mate, cheers got me back on the job properly top buy it was and ive grown quite attached to it actually haha.
Rob i would like to keep it but the missus insists i cant keep two but we will see i normally get my own way in the end, all depends if anyone is interested in her (the machine that is :lol1: )
-
keep it
you will regret in time putting loads of dirty standard cut vinyls through the print machine.
+ its a nice bit of kit as well.
-
I have to agree with my learned colleagues.
Keep it. 😀
-
More photos people.
£1500 ovno
Dont really have to sell it but if i get an offer within the next week i will let it go.
Cheers
Attachments:
-
missed one
Attachments:
-
have you any photos from underneath at a jaunty angle 😉
derek
-
Anything for you Mr Heron (:)
-
Sorry fellas and ladies of course, this machine is now sold.
Cheers
Gareth 😥
-
Hi Gareth
Sold very low on fle-bay I see @ just over £1100.00, was out on the road working and did not get a chance to use your Buy it now price.
win some loose some, do you think it was a good thing to sell it on Fle-bay with a auction format.
All the best
Paul -
HI Paul,
In hindsight no it wasn’t a good idea, I did managed to get the 1400 plus 30 delivery so it softened the blow a little. Sorry you didn’t manage to get a bid on it. Didn’t really want to sell it in the end but not got the room for that and a printer cutter.
-
Hi Ya
Thats good M8 did you ship it or take it there yourself. Space its a problem I fight with all the time were I am based LOL.
All the best Paul 😉
-
Gareth, started a new thread here with your pic http://www.uksignboards.com/viewtopic.p … 997#362997 would welcome your input.
-
Thought I might add my own bit to this,
As i was the winner of the flea-bay auction
i had already spoken to Gareth about this cutter, Without knowing that it was the same one that was on flea-bay,(snipping software) been looking at it all week,
Anyway long story short, Gareth was getting more money else where,
Because Gareth was a uksign-boards member i offered to stand-down after winning the auction as he had been made a far better offer. by someone else,
i expected it to go for the £1400 and didn’t bid that high, Although I wasn’t that far away.
I actually was struggling to pay for this at the £1400 as I explained to Gareth
However in the few hours between our phone call and the auctions end,
I called in a couple of oldish debts, Pissed off one customer, And lost another, by telling them i needed them to pay me asap,
Anyway had a £1000 as the auction ended, Gareth contacted me to say that he had a buyer at the correct money, And would i be willing to let it go,
I agreed as Gareth is a uksign-boards member and a fairly decent chap,
However if he had been Joe blogs selling on eBay,
That would have been a different story,
And i would have been at his door today with the money and a couple of Hairy bikers, (The none cooking kind), Looking for my cutter,
I’m gutted at not getting the cutter,
But if my standing back helps out another sign-boards member, Then so be it.
However Gareth you now owe me a drink, :drink4: And a nice word in certain person’s ears, Also the name of that supplier at your end of the country (you forgot to send it last night) Cheers Ray:) -
I’m getting it delivered to reading next week for him by Derek Heron of all people haha.
Ray did you get my text mate i sent it twice and if your at the signs show i will buy you a beer no probs.
Gareth
-
quote Gareth Hankinson:I’m getting it delivered to reading next week for him by Derek Heron of all people haha.
Ray did you get my text mate i sent it twice and if your at the signs show i will buy you a beer no probs.
Gareth
Yeah! Thanks Gareth,
Got the number, text-ed you back but you obviously didn’t get my reply,
I know theirs another place out past Durham that does jaguar systems dont suppose you have their number thanks Ray:) -
Grafityp do Jaguar cutters
http://www.grafityp.co.uk/Plotters/plotter-main.htm -
Not got their number mate, I might have a jaguar signpal cutter for you will let you know as soon as I do! Will post a pic when I can!
-
quote Gareth Hankinson:Not got their number mate, I might have a jaguar signpal cutter for you will let you know as soon as I do! Will post a pic when I can!
Sorry bit late with this reply
Thanks Gareth Let us know!
Log in to reply.