Roller banner media profile help

[Unknown Member]

Have you tried the Roland website to see if you can locate a profile for a similar material

[Danny Miller]

Hi tried a few different ones but no joy in getting a good finish, the best one so far is the spm profile in versaworks but needs to be printed in high quality to get a decent finish and takes forever to print

[Aaron McCulla]

Metamark md5 matte profile prints well for us on arlon roll up media, Worth a try.

[Danny Miller]

Cheers Aaron will it a go tomorrow

[Andrew Blackett]

We’ve always just used generic banner or pvc banner and they look fine. Would also second md5 as an option as it seems to give good results on most stuff.

Andy

[David Hammond]

MD5 for me too, I tend to increase the brightness a little as the so flat media we use tends to dull the colours.

[Danny Miller]

cheers boys will download the md5 now, one last question do you guys use standard or high quality settings when printing the pop up banners

[Aaron McCulla]

Normally Standard. If its heavy ink coverage or for a very fussy client then I use high quality.

[Andrew Blackett]

We use high speed for all our roller banners, using max flat type medias on our lightbar converted RE640.

Andy