-
Roland VP300 Power Cut Problems
Hi Guys. It’s just a quick question regarding my Roland VP… last week we had a power cut where I live for 12 hours so lost a days work and also worried all day that the printer would not work properly afterwards. But luckily it was fine. Anyway, again today we had another 9 hour power cut and again I’ve just printed a logo and it seems fine. So, my question is what should I do in future? Is it safe in power cuts as i was told you should never switch it off for long periods.
Cheer Luke
-
1 Reply
-
Get a UPS if it’s going to be an ongoing problem. I would be more worried about frying the electronics on it, than the heads drying out(as long as you can manage to pump ink through every 24hrs, should be fine).
Log in to reply.