-
Printing on frosted
I have been asked to do some frosted on an internal window with a printed colour logo. I guess I can either print on frosted or apply a clear reverse printed first, but this would seem to maybe have more issues with bubbles, bits of dust etc.
Any tips would be great!
Thanks
Nick
-
3 Replies
-
Print on clear the back it off in etch.
Just ‘laminate’ it like you would normally.
tried it both ways and this is the more pleasing / better visibility.
You also might want to up the saturation / more ink as it can look a bit washed out at times without the benefit of a strong white behind the ink.
Dave
-
nick if i remember you have white ink then here is a case to use it as a spot area behind any colours works very well on etch film printing.
we use image perfect opel flrost and back it with a clear vinyl to protect the ink. white is even reduced to about 65%
ok thats a age to print but worth the bother for the odd time required -
That’s great, it’s a one off so should be fine for this.
Many thanks
Log in to reply.