Home Forums Software Discussions General Software Topics Printing and cutting on second plotter

  • Printing and cutting on second plotter

    Posted by Jason Williams on 4 July 2009 at 14:03

    I’m using Roland colourip. to print to my Roland versacamme. but i could really start to use my roland gx-24 to cut the printed work out to free up the machine for more printing. i have used the function but only to using the same machine i printed it on after laminating,
    but i would thinks it’s possible to set colourip up to print on the versacamme and cut on the gx-24.
    or im i wrong.

    Jason Williams replied 16 years, 3 months ago 2 Members · 2 Replies
  • 2 Replies
  • Jason Xuereb

    Member
    5 July 2009 at 02:11

    Not familiar with ColorRIP but you can do it with Versaworks. Are you running a SP300/540 and not a SP300/540V ?

  • Jason Williams

    Member
    5 July 2009 at 09:11

    yep i did pay roland to convert it to a v but they could not do it as i have a very early board in my sp300.

Log in to reply.