Newbie :-) Digital printer/Vinyl cutter 2 make numberplates

[Phill Fenton]

I would look at doing more than simply making number plates as there are plenty of issues involved in making these (you need to register with the authorities and keep detailed records etc.). Most garages that sell cars produce their own plates in house and the market is very competitive. I would suggest you look at making a range of sign types for which you will be able to make far greater profit margins than on number plates alone. I would start off with a vinyl cutter as this will allow you to make number plates if that is to be your chosen speciality, but will also allow you to produce a fuller range of signs. Just my opinion.

As for wet and dry faced acrylic – I’m assuming the dry face is a reference to ordinary clear acylic without any glue. Number plate blanks themselves usually have one side that has a glue face ready for the reflective backing to be placed onto before passing through a roller mangle.

Good luck whatever you decide to do 😀

[Liz]

Many thanks for your help Phill 🙂
I think the vinyl cutter is my best starting point, especially as its a better price. thanks again

Liz

[Kenny Ramsey]

If you do intend to produce number plates only then you will find you run out of options very soon with just a vinyl cutter. As above, many garages do make their own plates in house in basic legal styles. You will find the market you are trying to reach want different pictures, logos etc on the side.

Kenny

[Richard Urquhart]

not cheap to run but i use my pc 60 to do number plates i can do full colour .logos etc etc but as phil has said lot of people are at it
by the time you have brought the plates made them and done a design template made them written down driver details ,log book details etc etc you get £ 20 a pair
i only do it cause i have the printer but i would not buy a printer to get in to number plates

i have use cut vinyl but it not as good as printing due to the vinyl being on top of the reflective when you put the pot acrylic on it can leave a small halo around each letter
i use wet face acrylics the reflective is dry then the acrylic sticks to reflective

rich

[Peter Mindham]

Hi Liz
I was using a vinyl cutter to make number plates. I have now purchased an OKI printer to print. colour and black and white plates. If you want a cheap alternative, PM me and I will ive you details of a system I have had on trial and now have purchased as a backup.
Peter

[Liz]

Hi, thanks for all your input 🙂

I was under the impression though that you are not able to print white, eg a st.georges cross, onto a yellow plate with a digital printer?
Are there more options available with a digital printer than a vinyl cutter?

Peter, I have searched for the button to PM you, but to no avail! 🙁

Thanks again

Liz

[Chris Wool]

quote :

Could anybody please give me a little bit of advice on which set-up is best to go for please? I would be very grateful.

you are setting up to flaunt the law WHY ? you see other people getting away with it at present but it will not last.
who carries there docs around with them at a market ?.

sorry but been there done that and got the t shirt.

chris

[carla ritchie]

ok hi mate oki is the way for me how ever sod the dearer c5 series printer get the 200 quid markl c3200n
does the job nicely
market sure do it i earn a great deal from it
registration if u or ur web site is based in scotland u dont need to register

mod-edit see board rules