uksignboards.com | Does anyone know where I can get PC-50 Cartridges?

Roland Cutters

Does anyone know where I can get PC-50 Cartridges?

Posted by James@MP on 30 June 2005 at 11:01

Now Don’t all laugh please.

Does anyone know where I can get PC-50 Cartridges, im looking for 4 more so i can at least change the colours. Along with a Blade holder. Im not going to be doing anything big with these because the reviews says its terrible but for the small tiny things i want to do with it, i think it will be fine. Im slowly learning how to do things with it from corel draw.

Any help will be much appreciated, i had thought i had found some @ 50p each for used ones then, i was told they are like rocking horse poop. If anyone has any recommendations please let me know?

Thanks

(mod-edit) please only use the "buy, sell, swap forum" for posts for requests to purchase items from another member
admin@uksignboards.com

Jamie Wood replied 10 years, 4 months ago 10 Members · 20 Replies
20 Replies

Paul Rollason

Member
30 June 2005 at 12:06

hi James

There is nothing wrong with a PC50/PNC5000, we started our business and ran it for the first year using the same machine

You can get 4 colour carts from roland plus you can get refills from thermal products.

Ask the suppliers of blades for blade holders

There are some tricks to getting the pnc5000 working from corel if you have any probs give us a ring 01326 210888

Paul r
James@MP

Member
30 June 2005 at 12:18

Hiya paul thanks for the reply, i ordered some cartridges from a company bit expensive @ £30.32 + vat per colour but it should get me started, where would i get the blades and cutters from for this machine ?
Paul Rollason

Member
30 June 2005 at 12:45

I think Grafityp do blades for the roland

I should ask them if they do blade holders also

paul r
James@MP

Member
30 June 2005 at 13:00

Got a price for the blades, but they dont stock the holders any more, these are a compatable blade, is there much difference. ?
Nigel Pugh

Member
30 June 2005 at 13:07

James,

Let me know what blades you purchased and I can check them against the blade holders that we do stock.

Nigel
James@MP

Member
30 June 2005 at 13:11

Hiya nigel i havent purchased any yet, im just looking for some so i can give this chap this one back, the holder needs to go into a roland pc-50, i need a blade and a holder. if you can give me a price i would be very grateful.
James@MP

Member
30 June 2005 at 13:42

Just had roland phone me back, im glad i was sitting down
A metal holder was about £80 and a plastic one was about £53, but i think once i have everything i will be a happy bunny.
Nigel Pugh

Member
30 June 2005 at 14:26

James,

Good news, the Roland blades that we supply do fit our blade holders, the downside I do not know if the diameter of the blade holder would suit your Roland.

As for prices sorry but you will have to call our sales office, don’t think I should be posting prices.

Nigel
Paul Rollason

Member
30 June 2005 at 14:48

the diametre of my pnc5000 blade holder is 11.5mm

paul r
James@MP

Member
30 June 2005 at 15:24

I just measured the one in this machine, and mines the same size,
Rodney Gold

Member
30 June 2005 at 15:29

The blade holders for the pnc5000 , pc50 are the same for any roland machine , buy the alluminium one and not the plastic one.
You can use the pc 60 refils in the 5000 as well.
James@MP

Member
6 July 2005 at 01:23

Hiya jobe, i would contact the sales office but i dont have those details, if you could oblige and supply them to me, thanks
James@MP

Member
28 October 2005 at 12:09

hiya nigel, i cant send you a private message asking for your sales office phone number for a pc-50 blade and holder.
maybe you can send me one with the contact details i require thanks

james
Robert Lambie

Member
28 October 2005 at 19:25

i would suggest giving dave standen a call at printone, he does lots of these types of products. does blades etc too very good prices 😀
Carrie Brown

Member
28 October 2005 at 19:27

You could use the Grafityp link/advert off the home page of here to contact Nigel … the ad is on the left hand side of the homepage?

😀
Dave Standen

Member
29 October 2005 at 15:00

Hi James
I’ve still got a few cartridges – What do you want ?
Dave Standen
James@MP

Member
23 December 2005 at 16:54

quote Dave Standen:

Hi James
I’ve still got a few cartridges – What do you want ?
Dave Standen

Hiya David, Have you still go some cartridges left ?
Am interested, my collection of cartridge holders is growing now, Mainly black ones at the moment.

Does anyone still do a jigg for these cartridges ?
i have put a thermal products ribbon in as the original ribbon is but the machine prints the ribbon but doesnt pull the ribbon back into the cartridge.

I have noticed that the original PC-50 cartridges i have got have got a much longer ribbon than the refills. ” Comes in handy when trying new things out ”

Merry Christmas Guys and a properous New Year to Everyone
James
badgeman

Member
28 January 2006 at 20:56

I have been buying blades for roland colour cam pc 50 and uniform cadet

(mod-edit) admin@uksignboards.com
Shane Dean

Member
12 May 2015 at 15:38

Paul,
I have just been given a roland pc50 from a school that was closing down.I have done a test print and it prints great. I have managed to get the roland to cut, but it refuses to print from corel draw X4. You mentioned that there are a few trick that has to be done before you can print from corel, can you help me?

Shane

quote Paul Rollason:

hi James

There is nothing wrong with a PC50/PNC5000, we started our business and ran it for the first year using the same machine

You can get 4 colour carts from roland plus you can get refills from thermal products.

Ask the suppliers of blades for blade holders

There are some tricks to getting the pnc5000 working from corel if you have any probs give us a ring 01326 210888

Paul r
Jamie Wood

Member
13 May 2015 at 11:09

It’s possible that you may have a wait for a reply, as the quoted part of the thread is nearly 10 years ago…..