-
can anyone tell me how to attach skybond to poles please?
Have just ordered a 10 x 5 sheet of skybond from Europoint.
Needs to be attached to 2 poles which are 8 feet apart and the poles are 3.5 inches diameter.
sign is going to be double sided. Can anyone suggest how I attach this to the poles and where I can get fittings from?
This is the first time I have used skybond material
-
5 Replies
-
you will need to rivet or VHB tape sign channel rails on the rear.
minimum of 4 rails per panel.
you will also need pole clips and back-to back clips.
various different styles of clips available these days for this type of thing…you could try d. gibsons in rutherglen
-
I would exercise some caution with using 2 posts of only 3.5 ins. diameter on a panel as big as 10 x 5. They are not really substantial enough for a panel this size – cover yourself by telling the client of your concern (I’m assuming the posts are already in place and your clients wants to use them anyway).
-
Can I ask how you are intending to make a double sided sign on one 10 x 5 with posts 8 ft apart and rails applied to rear?
Just curious that I may be missing something.
Ian :lol1:
-
Have already expressed concern about this sign to the customer but they insist this is what they want. It’s also a very open area and gets the wind all the time!!!
Thanks for the advice folks.
-
Get the client to hold the sheet in the exact location and see how long it is before they end up on their ar*e…… :lol1:
Log in to reply.