-
can anyone help with a pc 600 problem please?
having a big problem getting my pc 600 to cut print..it will cut fine from artcut, or print ok from corel but it wont do both..have installed colour choice..and drivers for xp that came with printer..have tryed settings in contour but they are none there for cutting..did read on forum someone else had same problem followed what they had done but no joy…it will print contour line but not cut…very gratefull of any help
-
5 Replies
-
have you set your line thickness at 0.00000001mm ? in corel. my pc 60 wouldn’t cut unless you typed in loads on 000000’s
ian
-
I just purchased one at the weekend. And was struggling to get it to print and cut. Like you said would do one or the other, not both. I use flexisign and found if i done contour cut"clicking the green tick" then solid fill it(black for example) click the "tick". Then rip and print and its now doing both 😀
CORAL
But maybe try going into file,print setup, change name to "roland pc600" then properties(to the right of it) advance tab.
Paper/Output – Pick the media size you are printing
Document Options – 600dpi & tick +high quality
Cutting – Select Cut Colour
Output Options-Output Date – Print *on* & Cutting "on" & Form Feed *off*
Process(cartride) – The one without a "K"Hope it helps you out in some way.
Cheers
JohnNow I just need to figure out how to get spot colors into them 😛
-
have looked on drop down menue etc for contour cut and cannot find it anywhere all i see is contour there is no menue to even change line thickness to 0000000000.1..either im missing something or the set ups wrong..its set to print and contour have tryed hairline but to no good
-
Try a ‘hairline’ either right click the object in Corel and select hairline from the toolbar or use the outline tool if this does not display. You may need to specify a ‘cut’ colour and name as well.
Alan D -
thankyou all who posted ,all working fine now…
Log in to reply.